牌号简介 About |
---|
说明:AC59树脂是一种高密度聚乙烯均聚物,采用溶液法生产,专为单丝应用而设计。它含有抗氧化添加剂。用途:薄膜挤出;单丝;拉斐亚;拉舍尔;网片;定向结构;通用。工艺:最佳工艺条件随生产中使用的设备类型而变化:铸膜-典型温度曲线:170至220°C。吹膜-典型温度曲线:170至220°C。单丝-典型温度曲线:170至220°C。 AC59 resin is a High Density Polyethylene, homopolymer, produced by solution process, designed for monofilament applications. It contains antioxidant additives. Applications: Film extrusion; monofilament; raffia; raschel; nets; oriented structures; general use. Process: The optimum processing conditions vary with the type of equipment used in the production: Oriented Structures cast film - typical temperature profile: 170 to 220°C. blown film - typical temperature profile: 170 to 220°C. monofilament - typical temperature profile: 170 to 220°C. Typical Stretch Ratio: 4 to 8:1. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.960 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
0.75 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
模压成型 Compression Molding |
180 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火,模压成型 0.45 MPa, unannealed, molded |
72.0 | ℃ | ASTM D648 |
维卡软化温度 Vicat Softening Temp |
127 | ℃ | ASTM D1525 1 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D,模压成型 Shaw's D, molded |
ASTM D2240 | ||
拉伸强度 tensile strength |
ASTM D638 | ||
屈服,模压成型 Yield, molding |
MPa | ||
断裂,模压成型 Fracture, molded |
MPa | ||
拉伸应变 Tensile strain |
ASTM D638 | ||
屈服,模压成型 Yield, molding |
% | ||
断裂,模压成型 Fracture, molded |
% | ||
弯曲模量 Bending modulus |
|||
1% 正割,模压成型 1% cut, molded |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 压 力1 (10N) |
【新闻资讯】查看全部
日媒:全球可再生能源投资首超油气投资
2021-08-03 搜料网资讯: 据《日本经济新闻》8月1日报道,世界各国对石油和天然气开发的投资规模正在逐渐缩减,化石燃料所面对的阻力越来越大。欧美石油巨头纷纷收紧对该领域的投资。发电 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |