牌号简介 About |
---|
Dyna-Purge C专为透明透明树脂设计,是一种透明、非研磨、非化学工程热塑性清洗化合物,用于清洗高清晰度树脂,如PET、GPPS、PC、SAN和PMMA。专用添加剂膨胀,允许吹扫到达并清洁机器的所有区域。载体基质然后冲洗掉之前的树脂和其他杂质,消除任何“乳状拖拽”或残留物。特点和优点:非常适合过渡到透明或透明树脂,预防性机器维护,以及在手动清洗之前,非常适合通过热流道系统、模具或其他下游设备进行清洗,在380°F-590°F(193°C-310°C)的温度范围内有效,易于使用-无需工艺调整-使用t常驻树脂处理温度和转速非磨蚀热塑性塑料,彻底松动碳化和降解的树脂,使其能够安全、无害地从系统中冲洗出来,不含任何化学物质-成分符合FDA标准,热稳定-建议在停机和启动期间降低“每次清洗的成本”-只有很小的质量需要有效的完整性,不需要混合-简单使用“原样”无限保质期 Designed for Clear and Transparent Resins DYNA-PURGE C is a clear, non-abrasive, non-chemical engineered thermoplastic purging compound, formulated to purge high clarity resins such as PET, GPPS, PC, SAN and PMMA. A proprietary additive expands allowing for the purge to reach and clean all areas of the machine. The carrier matrix then flushes away the previous resin and other impurities, eliminating any "milky drag" or residue. FEATURES & BENEFITS: Excellent for transition to clear or transparent resin, preventative machine maintenance, and before manual cleaning Excellent for purging through hot runner systems, dies, or other downstream equipment Effective through a wide temperature range 380°F-590°F(193°C-310°C) Easy to use - no process adjustment necessary - use at the resident resin processing temperature and RPM speed Non-abrasive thermoplastic, which thoroughly loosens carbonized and degraded resin, allowing it to be flushed out of the system Safe, non-hazardous, with no chemicals - ingredients are FDA compliant Heat stable - recommended during shutdown and start-up Low "cost-per-purge" - only small quantity needed to be effective No mixing required - simply use "as is" Unlimited shelf life |
技术参数 Technical Data | |||
---|---|---|---|
暂无数据 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
现阶段对废塑料的管控曾经延伸到世界范围
2018-10-15 2017年之前废塑料主要由发达国家向发展中国家转移,但由于废塑料中存在掺杂限制类固废以及化学残留物、废渣、废水等有害物质,加工处理国对此需要付出环境代价。自去年开始,中国出台禁废令,自此之后多个国家开始加强对废塑料的管控。另外,目前海洋垃圾对海洋生物,以及水资源造成严重污染,引起各国注意后对此加大管控。现阶段对废塑料的管控已经延伸到世界范围。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |