牌号简介 About |
---|
IE3067是为计量混合配制而配制的硬质聚氨酯喷涂涂层。在不使用汞、MOCA或TDI的情况下,室温固化可获得优异的物理性能。该产品开发用于需要垂直上铺的地方。 IE-3067 is a rigid polyurethane spray coat formulated for meter mix dispensing. Excellent physical properties can be obtained with a room temperature cure without the utilization of mercury, MOCA or TDI. This product was developed to be used where vertical lay-ups are required. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
Hardener Hardener |
1.22 | g/cm³ | |
固化处理 Curing treatment |
1.24 | g/cm³ | |
基体树脂 Matrix resin |
1.34 | g/cm³ | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
弯曲模量 Bending modulus |
4380 | MPa | ASTM D790 |
弯曲强度 bending strength |
78.6 | MPa | ASTM D790 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热固组件 Thermosetting components |
|||
树脂 resin |
|||
硬化法 Hardening method |
|||
脱模时间 stripping time |
min | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
粘度 viscosity |
|||
25℃ 25℃ 2 |
Pa·s | ||
25℃ 25℃ 3 |
Pa·s | ||
固化时间 Curing time |
|||
25℃ 25℃ |
hr | ||
胶凝时间 Gelation time |
min | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Hardener |
3 Resin |
【新闻资讯】查看全部
香港历史上第一次强力监管废塑料进口
2020-09-29 搜料网资讯: 香港环保署于2020年9月11日公布废塑料进出口的指引及管制,目的是要配合巴塞尔公约中修改于2021年1月1日在全球187国家及地区正式生效及执行条例的内容。 法例的精神是 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |