牌号简介 About |
---|
Kraton D1113 P是一种基于苯乙烯和异戊二烯的透明线性三嵌段共聚物,聚苯乙烯含量为16%。它由北美提供,其物理形式如下所示。Kraton D1113 pt-作为一个尘密颗粒提供。Kraton D1113 P用作配制粘合剂、密封剂和涂层的成分。它也可以用作沥青或热塑性塑料的改性剂和化合物配方。 Kraton D1113 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied from North America in the physical form identified below. Kraton D1113 PT - supplied as a dusted dense pellet. Kraton D1113 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.918 | g/cm³ | ASTM D4025 |
熔体质量流动速率 Melt Flow Rate |
|||
200℃,5.0kg 200℃,5.0kg |
24 | g/10min | |
Antioxidant Additive Antioxidant Additive 2 |
0.080 到 0.30 | % | 内部方法 |
聚苯乙烯含量 Polystyrene content |
15 到 17 | % | 内部方法 |
挥发物 Volatiles |
< 0.50 | % | 内部方法 |
溶液粘度 Solution viscosity |
|||
25wt%甲苯,25℃ 25wt% toluene, 25 ℃ |
mPa·s | 内部方法 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A,10 秒,149℃,模压成型 Shore A, 10 seconds, 149 ℃, molded |
ASTM D2240 | ||
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ASTM D412 | |
300% 应变 300% strain |
MPa | ASTM D412 | |
拉伸应变 Tensile strain |
|||
屈服 yield |
% | ASTM D412 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Diblock Content Diblock Content |
|||
Dust,Talc Dust,Talc |
% | 内部方法 | |
Styrene/Rubber ratio Styrene/Rubber ratio |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Primary antioxidant is a non-staining, phenolic antioxidant. The antioxidant package also contains a non-TNPP secondary antioxidant at a target level of 0.2% wt. |
【新闻资讯】查看全部
壳牌化工部门利润走弱
2022-01-23 1月7日,壳牌公司表示,由于大宗化学品的利润率继续下跌,该公司化工部门的利润预计在2021的最后3个月内走弱,该部门的盈利能力和合资企业收益将出现季度环比下降。 该公司表示 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |