牌号简介 About |
---|
说明:EPOCAST1626-A/B环氧树脂复合材料是一种由两部分组成的复合材料,设计用于蜂窝结构的芯填充、边缘密封、衬套和紧固件封装。易处理的粘性膏体具有低流动性。EPOCAST 1626-A/B环氧树脂复合材料是一种抗开裂的增韧体系,特别适用于可能涉及高振动和宽温度循环的应用。EPOCAST1626-A/B环氧树脂复合材料在环境老化后具有良好的强度保持力,符合BMS 5-28,26型的要求。 DESCRIPTION: Epocast® 1626-A/B epoxy syntactic is a two-part compound designed for core filling, edge sealing, and bushing and fastener potting of honeycomb structures. The easy-to-handle viscous paste has low flow characteristics. Epocast® 1626-A/B epoxy syntactic is a toughened system which resists cracking and is especially well suited for applications that may involve exposure to high vibration and wide temperature cycling. Epocast® 1626-A/B epoxy syntactic has good retention of strength after environmental aging and is qualified to BMS 5-28, Type 26. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
ASTM D1622 | ||
-- -- 2 |
0.500 | g/cm³ | ASTM D1622 |
-- -- 3 |
0.650 | g/cm³ | ASTM D1622 |
-- -- 4 |
1.10 | g/cm³ | ASTM D1622 |
粘度 viscosity |
ASTM D2196 | ||
25℃ 25℃ 3 |
Paste | ASTM D2196 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
28 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热固组件 Thermosetting components |
|||
树脂 resin |
|||
硬化法 Hardening method |
|||
胶凝时间 Gelation time 3 |
|||
50 gms,25℃ 50 gms,25℃ 3 |
hr | ASTM D2471 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Tensile Lap Shear(AL/AL,25℃) Tensile Lap Shear(AL/AL,25℃) |
MPa | ASTM D1002 | |
T-Peel - AL/AL T-Peel - AL/AL |
kN/m | ASTM D1876 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Resin |
3 System |
4 Hardener |
【新闻资讯】查看全部
全美第三季度塑料机械出货量表现微弱
2015-12-07 根据美国塑料工业协会塑料行业贸易协会设备统计委员会(简称CES)编制发布的报告显示,2015年第三季北美供应商塑料机械总出货量表现强劲。 “CES的出货量数据在2015年中趋于平稳,但是都保持在较高水平。美国制造业的发展在第三季度放缓,塑料机械供应商能够感受到这一变化。但塑料行业的发展速度比其他工业部门都要快。预计2016年美国的GDP将以2.0%-2.5%的速度在增长。由于市场总体需求保持积极稳定,对塑料机械的需求也将稳步上升。”经济分析师比尔•伍德(Bill Wood) |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |