牌号简介 About |
---|
Alcryn® ALR 7225 MPR的耐热性比标准Alcryn等级高,温度上限为136°C,同时保持至少85%的原始拉伸性能。ALR 7225设计用于挤压工艺,特别是电线和电缆应用,在需要提高耐温性的地方应予以考虑。 Alcryn® ALR 7225 MPR has improved heat resistance over standard Alcryn grades and has an upper temperature limit of 136°C, while retaining at least 85% of original tensile properties. ALR 7225 is designed for the extrusion process, specifically Wire & Cable applications and should be considered where increased temperature resistance is required. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.30 | g/cm³ | ASTM D792 |
密度 Density |
1.30 | g/cm³ | ISO 1183 |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
9.64 | MPa | ISO 37 |
100% 应变 100% strain |
4.85 | MPa | ASTM D412 |
100% 应变 100% strain |
4.85 | MPa | ISO 37 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 37 | |
断裂 fracture |
% | ASTM D412 | |
撕裂强度 tear strength 2 |
|||
24℃ 24℃ 2 |
kN/m | ASTM D624 | |
压缩形变 Compression deformation |
ASTM D395B | ||
24℃,22 hr 24℃,22 hr |
% | ASTM D395B | |
70℃,22 hr 70℃,22 hr |
% | ASTM D395B | |
压缩形变 Compression deformation 3 |
ISO 815 | ||
24℃,22 hr 24℃,22 hr |
% | ISO 815 | |
70℃,22 hr 70℃,22 hr |
% | ISO 815 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
ISO 868 | ||
邵氏 A Shaw's A |
ASTM D2240 | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | ASTM D257 | |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength |
|||
0.00191 mm 0.00191 mm |
kV/mm | ASTM D149 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 C 模具 |
3 类型 B |
【新闻资讯】查看全部
陕鼓集团与中国旭阳集团签订战略合作协议
2021-04-24 搜料网资讯: 4月19日,中国 旭阳 集团有限公司(以下简称旭阳集团)董事长杨雪岗一行来访陕鼓,就双方战略合作等事宜开展交流,并代表中国旭阳集团同陕鼓集团签订了战略合作协 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |