物性表自定义
公司信息及水印
公司信息及水印
下载中文物性表
下载英文物性表
邮件发送/他人
| 牌号简介 About |
|---|
| Bormed™ BE860MO是一种异相共聚物。这一等级的特点是具有优异的冲击强度，即使在低温下，结合高刚度和良好的流动性能。应用：瓶盖和瓶盖制药和诊断包装 Bormed BE860MO is a resin intended for evaluation for use in Healthcare applications. BormedTM BE860MO is a heterophasic copolymer. This grade is characterized by an easy flow and excellent impact strength even at negative temperatures. CAS-No.: 9010-79-1 Applications Bormed BE860MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed BE860MO . Bottles and containers for tablets Caps and closures Bottles and containers for powder Connectors for tubing Bottles and containers for granules This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure. Special Features Good impact strength at low temperature Good flow behaviour |
产品描述 Product Description
用途：护罩;外壳;药品包装;
加工条件：注射成型 Injection Molding
性能特点： 机械强度好; 共聚物; 耐低温冲击; 冲击性能好; 易流动; Good Rigidity,High impact resistance,Good liquidity,Copolymer,low-temperature impact resistance
| 技术参数 Technical Data | |||
|---|---|---|---|
|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
密度 Density |
0.902 | g/cm³ | ISO 1183 |
|
熔体质量流动速率 Melt Flow Rate |
|||
|
230℃，2.16kg 230℃，2.16kg |
13 | g/10min | ISO 1133 |
|
收缩率 Shrinkage rate |
1.0 to 2.0 | % | |
|
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
简支梁缺口冲击强度 Charpy Notched Impact Strength |
ISO 179/1eA | ||
|
-20℃ -20℃ |
4.0 | kJ/m² | ISO 179/1eA |
|
23℃ 23℃ |
8.0 | kJ/m² | ISO 179/1eA |
|
多轴向仪器化冲击能量 Multi axial instrumented impact energy |
ISO 6603-2 | ||
|
-20℃，Total Penetration Energy -20℃，Total Penetration Energy |
J | ISO 6603-2 | |
|
0℃，Total Penetration Energy 0℃，Total Penetration Energy |
J | ISO 6603-2 | |
|
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
热变形温度 Hot deformation temperature 1 |
|||
|
0.45 MPa，未退火 0.45 MPa, unannealed 1 |
℃ | ISO 75-2/B | |
|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
拉伸模量 Tensile modulus |
|||
|
注塑成型 injection molding |
MPa | ISO 527-1-2 | |
|
拉伸强度 tensile strength |
|||
|
屈服，注塑成型 Yield, injection molding |
MPa | ISO 527-2/50 | |
|
拉伸应变 Tensile strain |
|||
|
屈服，注塑成型 Yield, injection molding |
% | ISO 527-2/50 | |
|
洛氏硬度 Rockwell hardness |
|||
|
R 级 R-level |
ISO 2039-2 | ||
| 备注 |
|---|
| 1 一般属性：这些不能被视为规格。 |
| 2 Injection molded specimen |
|
【新闻资讯】查看全部 
优巨新资料掌PPSU生产技术 年销售目标无望达到25亿
2016-06-30 据报道，江门市优巨新材料有限公司研发的特种工程塑料聚亚苯基砜(PPSU)技术在国际上达到先进水平，已经申请了七十多个专利，目前正在申请国外的专利。该材料可以广泛制造食品接触器具、医疗器械等，填补了国内空白。 < |
|
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。 |
当前牌号已加入对比
支付宝
微信支付