牌号简介 About |
---|
3.5用于热成型应用的熔融流澄清均聚物Pinnacle聚合物聚丙烯1403N是通过Unipol PP技术制成的,该技术利用具有高活性催化剂系统的气相流化床反应器,以确保统一的物理性能和批次间的一致性。本产品适用于挤压板和热成型应用。流动特性和高刚度的结合为集装箱提供了轻量化潜力。1403N含有一个澄清剂,提供良好的透明性。1403N产品提供:优异的颜色和加工稳定性、良好的熔融强度和可拉伸性、高清晰度、低水平的可提取性、Pinnacle's聚丙烯,由Pinnacle Polymers公司销售,采用天然、未着色颗粒形式,符合CFR标题21第177部分B子部分第177.1520(c)1.1a节的适当要求。题为“烯烃聚合物”的食品添加剂修正案1958年美国食品,药品和化妆品法案1938年。 3.5 MELT FLOW CLARIFIED HOMOPOLYMER FOR THERMOFORMING APPLICATIONS Pinnacle Polymers Polypropylene 1403N is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency. This product is intended for extruded sheet and thermoforming applications. The combination of flow characteristics and high stiffness provide light-weighting potential for containers. 1403N contains a clarifier providing excellent see-through clarity. The 1403N product provides: Superior color and processing stability Good melt strength and stretchability High clarity Low level of extractables Pinnacle's polypropylene, as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
3.5 | g/10min | ASTM D1238 |
收缩率 Shrinkage rate |
|||
MD MD |
1.7 | % | ASTM D955 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
屈服,3.20 mm,注塑成型 Yield, 3.20 mm, injection molding 2 |
38.6 | MPa | ASTM D638 |
拉伸应变 Tensile strain 2 |
|||
屈服,3.20 mm,注塑成型 Yield, 3.20 mm, injection molding 2 |
12 | % | ASTM D638 |
弯曲模量 Bending modulus 3 |
|||
1% 正割,3.20 mm,注塑成型 1% cut, 3.20 mm, injection molded 3 |
MPa | ASTM D790-A | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch 4 |
|||
23℃,3.2mm,注塑成型 23 ℃, 3.2mm, injection molding 4 |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
雾度 Haze |
|||
1270 µm 1270 µm |
% |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 类型 1, 2.0 in/min |
3 类型 1, 0.050 in/min |
4 Type I |
【新闻资讯】查看全部
永昌土豆采收忙 全生物可降解地膜“帮大忙”
2021-10-13 搜料网资讯: 与以往一到丰收季,田间地头废旧农膜胡乱堆积、散落的情况有所不同,今年的秋收季,永昌县东寨镇双桥村的田地里却非常的干净,东寨镇有什么法宝?能让白色污染不 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |