物性表自定义
公司信息及水印
公司信息及水印
下载中文物性表
下载英文物性表
邮件发送/他人
| 牌号简介 About |
|---|
| LUBMER™ L5000是一种高分子量聚乙烯材料,。 该产品在北美洲有供货,。 LUBMER™ L5000的主要特性有: 阻燃/额定火焰 耐冲击 耐磨 典型应用领域包括: 工程/工业配件 汽车行业 LUBMER™ L5000 LUBMER™ L5000 is a High Molecular Weight Polyethylene material. It is available in North America. Important attributes of LUBMER™ L5000 are: Flame Rated Impact Resistant Wear Resistant Typical applications include: Engineering/Industrial Parts Automotive LUBMER™ L5000 LUBMER is a specially polyethylene developed by Mitusi Chemicals' original polymerization technology. LUBMER has outstanding sliding properties, abrasion resistance and moldability. Especially, LUBMER is used for a wide range of applications for soundproofing parts of office automation equipments, automotive, electrical and electronic parts. In addition, LUBMER is making a significant contribution to the development of building materials, mechanical parts, etc.. attracting attention as a high-performance material that will build a future. Features: Sliding properties Food Safety Abrasion resistance Chemical resistance Electrical insulating properties Noiseless properties Applications: Electrical/office automation equipment parts Automotive parts General equipment parts, building materials, and other parts |
产品描述 Product Description
用途：轴承;齿轮;薄壁部件;汽车内部零件;
性能特点： 防火阻燃等级HB; 耐磨; 减震; 冲击性能好; 低摩擦系数; High impact resistance,noise reduction,Low coefficient of friction,Good wear resistance,HB
| 技术参数 Technical Data | |||
|---|---|---|---|
|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
密度 Density |
0.966 | g/cm³ | ASTM D792 |
|
收缩率 Shrinkage rate |
|||
|
TD：2.0 mm TD：2.0 mm |
1.6 | % | ASTM D955 |
|
MD：2.0 mm MD：2.0 mm |
1.8 | % | ASTM D955 |
|
吸水率 Water absorption rate |
|||
|
24hr 24hr |
0.010 | % | ASTM D570 |
|
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
|
23℃，2mm 23℃，2mm |
190 | J/m | ASTM D256 |
|
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
热变形温度 Hot deformation temperature |
|||
|
0.45 MPa，未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
|
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 4 | |
|
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
|
MD MD |
1/℃ | ASTM D696 | |
|
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
|
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
|
介电常数 Dielectric constant |
|||
|
23℃ 23℃ |
ASTM D150 | ||
|
耗散因数 Dissipation factor |
|||
|
1 MHz 1 MHz |
ASTM D150 | ||
|
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
1.60 mm 1.60 mm |
UL 94 | ||
|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
拉伸强度 tensile strength 2 |
|||
|
断裂，23℃ Fracture, 23 ℃ 2 |
MPa | ASTM D638 | |
|
拉伸应变 Tensile strain 2 |
|||
|
断裂，23℃ Fracture, 23 ℃ 2 |
% | ASTM D638 | |
|
弯曲模量 Bending modulus 3 |
|||
|
23℃，3 mm，48 mm跨距 23 ℃, 3 mm, 48 mm span 3 |
MPa | ASTM D790 | |
|
弯曲强度 bending strength 3 |
|||
|
屈服，23℃，3 mm，48 mm跨度 Yield, 23 ℃, 3 mm, 48 mm span 3 |
MPa | ASTM D790 | |
|
洛氏硬度 Rockwell hardness |
|||
|
R 级 R-level |
ASTM D785 | ||
| 备注 |
|---|
| 1 一般属性：这些不能被视为规格。 |
| 2 类型 5, 2.0 in/min |
| 3 0.20 in/min |
| 4 压 力1 (10N) |
|
【新闻资讯】查看全部 
百合花股价涨停 因受宁德时代发布钠离子电池消息刺激！
2021-05-30 搜料网资讯； 5月24日，百合花股价盘中触及涨停，最高报16.76元/股，截至下午3点收盘，股价涨停，大涨9.97%，报收16.76元/股，总市值达53.25亿元。公司实施2020年年度权益分派，每股派发 |
当前牌号已加入对比
支付宝
微信支付