![](/page/pc/images/result/icon-datasheet-right-ad-none.png)
![](/page/pc/images/result/downloads-img2.png)
公司信息及水印
![](/page/pc/images/result/downloads-img4.png)
![](/page/pc/images/result/downloads-img1.png)
![](/page/pc/images/result/downloads-tag3.png)
![](/page/pc/images/result/downloads-img1.png)
![](/page/pc/images/result/downloads-tag3.png)
![](/page/pc/images/result/downloads-img3.png)
牌号简介 About |
---|
用于注射成型的聚丙烯无规共聚物的优点和特点200-CA13是一种特别改性的高度透明的聚丙烯无规共聚物,具有中等熔融流,用于注射成型和注射拉伸吹塑。200-CA13是专为高速注塑而配制的,含有成核剂和脱模剂,可提高脱模温度,缩短冷却时间。由200-CA13浇铸而成的产品具有良好的透明度、良好的感官性能、良好的刚度平衡和室温冲击强度、低晕染和良好的脱模性能。应用200-CA13是专为透明注塑家庭用品、瓶盖和食品包装设计的,需要良好的冲击强度和良好的感官性能。200-CA13也适用于注塑拉伸吹塑(ISBM)。从200-CA13成功注射成型的产品的例子有:家用容器、要求良好透明度的电器、甜盒、盖子和瓶盖、瓶子。 Polypropylene Random Copolymer for Injection moulding Benefits & Features 200-CA13 is a specially modified highly transparent polypropylene random copolymer with medium melt flow intended for injection moulding and injection stretch blow moulding. 200-CA13 is specially formulated for high speed injection moulding and contains nucleating and mould release additives allowing high de-moulding temperature as well as reduced cooling time. Products moulded from 200-CA13 have excellent transparency, very good organoleptical properties, good balance of stiffness and impact strength in ambient temperature, low blooming and good de-moulding properties. Applications 200-CA13 is designed for transparent injection moulded houseware, closures and food packaging needing good impact strength and excellent organoleptic properties. 200-CA13 is also suitable for injection stretch blow moulding (ISBM). Examples of products successfully injection moulded from 200-CA13 are: Houseware containers Appliances requiring good transparency Sweet boxes Lids and pails Closures Bottles |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
13 | g/10min | ISO 1133 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服,23℃,注塑成型 Yield, 23 ℃, injection molding |
28.0 | MPa | ISO 527-2 |
弯曲模量 Bending modulus |
|||
23℃,注塑成型 23 ℃, injection molding |
1100 | MPa | ISO 178 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ISO 180/A | ||
0℃,注塑成型 0 ℃, injection molding |
3.3 | kJ/m² | ISO 180-A |
23℃,注塑成型 23 ℃, injection molding |
6.0 | kJ/m² | ISO 180-A |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
维卡软化温度 Vicat Softening Temp |
|||
A50 A50 |
℃ | ISO 306/A50 | |
结晶峰温度 Crystallization peak temperature 12 |
|||
DSC DSC 12 |
℃ | Internal Method | |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
雾度 Haze |
ASTM D1003 | ||
1000 µm 1000 µm |
% | ASTM D1003 | |
2000 µm 2000 µm |
% | ASTM D1003 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部 ![]()
刘烨怒摔手机抬杠章子怡——手机君:我无辜的
2017-10-30 近日,刘烨和章子怡在录制《演员的诞生》时大吵起来,刘烨在节目现场怒摔手机,而章子怡发声对刘烨说:刘烨你除了拍手机还会干什么。 两大牌抬杠引发吃瓜群众热议不断,有求真 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |