牌号简介 About |
---|
旭化成Tuftec™ MP10是胺改性SEBS。MP10可用作聚酰胺(PA)或聚酯(PES)、聚乳酸(PLA)和热塑性聚氨酯(TPU)等工程塑料的改性剂。它特别适用于TPU的粘合剂。也可用作PS或烯烃树脂和极性树脂的增容剂。它对无机填料具有良好的粘附性,能使无机填料很好地分散到塑料中。 Asahi Kasei Tuftec™ MP10 is amine-modified SEBS. MP10 can be used as a modifier for engineering plastics such as polyamide (PA) or polyester (PEs), polylactic acid (PLA) and thermoplastic polyurethane (TPU). It is particularly suitable for an adhesive to TPU. It is also used as a compatibilizer of PS or olefinic resin and polar resins. It shows excellent adhesion to inorganic fillers, which can achieve good dispersion of inorganic fillers into plastics. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.910 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
4.0 | g/10min | ISO 1133 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
89 | ISO 7619 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
断裂 fracture 2 |
28.0 | MPa | ISO 37 |
300% 应变 300% strain |
5.60 | MPa | ISO 37 |
拉伸应变 Tensile strain 2 |
|||
断裂 fracture 2 |
% | ISO 37 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Styrene/Rubber ratio Styrene/Rubber ratio |
内部方法 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 类型 1A, 20 in/min |
【新闻资讯】查看全部
期市早参:工信部严禁钢铁等新增产能 钢协建议“三限、两不限”
2021-04-21 搜料网资讯: 工信部发文表示,严禁钢铁、水泥、平板玻璃新增产能,严管严控电解铝新增产能。 期货行情 国内期货:4月20日国内商品期货多数收涨,铁矿涨近4%,20号胶、苯乙烯涨超 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |