牌号简介 About |
---|
Moplen EP642s Moplen EP642S是PMC根据Basell的许可使用Spheripol工艺生产的聚丙烯嵌段共聚物。Moplen EP642S是一种适用于汽车配基、薄壁包装、家庭用品等的嵌段共聚物。Moplen EP642S树脂符合21 CFR 177.1520中有关食品接触的联邦法规中的FDA要求。Moplen EP642s Moplen EP642S是一种使用Spheripol工艺制造的聚丙烯冲击共聚物。这一等级以具有最佳刚度和韧性平衡而闻名。典型的应用包括薄壁容器和其他家庭用品的注射成型,以及作为用于复合的基树脂。 Moplen EP642S Moplen EP642S is the polypropylene block copolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen EP642S is a block copolymer suitable for automotive compounding base,thin-walled packaging, housewares, etc. Moplen EP642S resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. Moplen EP642S Moplen EP642S is a polypropylene impact copolymer with an optimized balance of stiffness and toughness, high flowability and low warpage. Typical customer applications are injection molding of Thin Wall (TWIM) Containers, housewares, and as base resin for automotive compounding. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
37 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ASTM D256 | ||
-20℃,注塑成型 -20 ℃, injection molding |
39 | J/m | ASTM D256 |
23℃,注塑成型 23 ℃, injection molding |
78 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火,注塑成型 0.45 MPa, unannealed, injection molded |
125 | ℃ | ASTM D648 |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸强度 tensile strength |
|||
屈服,注塑成型 Yield, injection molding |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂,注塑成型 Fracture, injection molding |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
注塑成型 injection molding |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
3D打印和汽车行业推进市场增长
2018-03-16 预计到2023年,全球工程塑料市场将出现强劲增长。全球市场的增长是受到终端应用中工程塑料替代传统材料、终端行业正增长、3D打印对聚酰胺需求增长及汽车行业对工程塑料需求上升的驱动。来自新兴经济的上涨需求和工程塑料在航空航天工业中的使用也支持全球工程塑料市场实现进一步增长。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |