牌号简介 About |
---|
本数据表描述了TEKNILID 1218产品。该盖料是为需要高氧气和防潮性能的食品、医药和化妆品应用而设计的。该盖料设计有通用热密封(HS)密封件,用于大多数托盘(PET、PE、HIPS和PVC),根据成分提供不同程度的易剥性。在托盘和密封条件下,可定制和标准打印。由聚酯/白色聚乙烯(w-pe)外层提供的明亮的白色外观使水性油墨的印刷表面非常好。 This data sheet describes TEKNILID 1218 product This lid stock is designed for Food, Pharmaceutical, and Cosmetic applications requiring high oxygen and moisture barrier properties This lid stock is designed with a universal heat sealable (HS) seals to most trays (PET, PE, HIPS, and PVC) providing different levels of peelabililty depending on composition of tray and sealing conditions It is available with custom and standard printing. A bright white exterior provided by Polyester / white Polyethylene (W PE) outer layers makes an excellent printing surface for water based inks |
技术参数 Technical Data | |||
---|---|---|---|
薄膜 film |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
薄膜厚度 film thickness 2 |
157 | µm | |
密封强调 Sealing emphasis |
|||
-- -- 3 |
0.78 | N/mm | |
-- -- 4 |
0.78 | N/mm | |
氧气传输速率 Oxygen transfer rate |
|||
23℃,100% RH 23℃,100% RH |
0.0 | cm³/m²/24 hr | |
水气透过率 Water vapor transmittance |
|||
38℃,90% RH 38℃,90% RH |
0.0 | g/m²/24 hr | |
用量 dosage |
m²/kg |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Thickness tolerance: ±10% |
3 To PET @ 350°F, 40psi, 0.5 sec |
4 To PE @ 350°F, 40psi, 0.5 sec |
【新闻资讯】查看全部
中韩石化新产品PRC100经过国度化学建材检测测试
2018-12-10 12月6日,中韩石化高密度聚乙烯管材新产品PRC100,在国内管材唯一权威认证机构――国家化学建材检测中心通过耐慢速裂纹增长8760小时测试认证,标志着中韩石化在聚乙烯管材升级上取得重大突破,产品进入国内领先行列。 PRC100是中韩石化高密度聚乙烯装置使用国产催化剂生产,适用于非开挖先进施工领域的管材专用料,是当前国际上最高端的聚乙烯管材品类,这一品类管材开发被列为集团公司科技部重大专项。 目前国内传统的PE100级供水管年需求量约300万吨,第四代PE1 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |