牌号简介 About |
---|
Menzolit® BMC 0300是一种基于不饱和聚酯树脂的整体模塑料。该产品是玻璃纤维增强,含有矿物填料。如果发生火灾,产品不会熔化,也不会形成液滴,也不会产生过量的烟雾。这种材料是在加热的钢模中注射成型的。建议使用镀铬工具。该产品不含卤素。Menzolit® BMC 0300是一种通用的低收缩标准材料,需要更高的表面质量和更好的尺寸稳定性。玻璃含量在一个结合了良好的模具能力和良好的强度和刚度特性的水平上。典型应用是电气工业中的外壳和盖子、家用电器和办公设备的组件。由于减少了收缩翘曲,因此可以实现均匀着色。 Menzolit® BMC 0300 is a bulk moulding compound based on unsaturated polyester resin. The product is glass fibre reinforced and contains mineral fillers. In case of fire the product doesn't melt, neither does it form droplets nor is smoke generation excessive. The material is injection moulded in heated steel moulds. It is recommended to work with chrome plated tools. The product contains no halogens. Menzolit® BMC 0300 is a low shrink standard material for general-purpose applications, which require a higher level on surface quality and better dimensional stability. The glass content is on a level that combines good mould ability with good strength and stiffness properties. Typical applications are housings and covers in the electric industry, components for household appliances and office equipment. Due to reduced shrinkage warpage is reduced and a homogeneous colouration is possible. |
产品描述 Product Description
厂家:德国Menzolit
类别:热固性聚酯 热固性聚酯
用途:电器外壳;电气/电子应用领域;通用;电器用具;
颜色:可用颜色
加工条件:注射成型 Injection Molding
性能特点: 无卤; 防火阻燃等级HB; 低烟; 机械强度好; 尺寸稳定性好; 耐高温; 低翘曲性; 阻燃; 收缩性低; 表面光泽度好; 易加工; Good Rigidity,Low warping,Excellent Processability,Good surface appearance,Low smoke,Good Dimensional Stability,Low contractility,Halogen free,Flame Characteristics,High Heat Resistance,HB
填料:玻璃纤维
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.90 | g/cm³ | ISO 1183 |
收缩率 Shrinkage rate |
|||
-- -- |
0.080 | % | ISO 2577 |
-- -- 3 |
0.0 | % | DIN 53464 |
吸水率 Water absorption rate |
|||
饱和,23℃ Saturation, 23 ℃ |
< 0.50 | % | ISO 62 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
|||
模压成型 Compression Molding |
13000 | MPa | ISO 527-2 |
拉伸强度 tensile strength |
|||
屈服,模压成型 Yield, molding |
MPa | ISO 527-2 | |
弯曲模量 Bending modulus |
|||
模压成型 Compression Molding |
MPa | ISO 178 | |
弯曲强度 bending strength |
|||
模压成型 Compression Molding |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
模压成型 Compression Molding |
kJ/m² | ISO 179 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
连续使用温度 Continuous use temperature |
℃ | 内部方法 | |
玻璃化转变温度 Glass transition temperature |
℃ | DSC | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ISO 11359-2 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | IEC 60093 | |
体积电阻率 Volume resistivity |
ohms·cm | IEC 60093 | |
相比漏电起痕指数 Compared to the leakage tracing index |
V | IEC 60112 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
3.00 mm 3.00 mm |
UL 94 | ||
灼热丝起燃温度 Igniting temperature of the hot wire |
℃ | IEC 60695-2-13 | |
极限氧指数 Extreme oxygen index |
% | ISO 4589-2 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Glow Bar Glow Bar |
IEC 60707-3 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Post Molding Shrinkage |
【新闻资讯】查看全部
天津石化聚烯烃新产品专用料产销两旺
2022-04-14 天津石化积极研判市场,持续做大高附加值产品产量。一季度,累计生产聚烯烃新产品及专用料72694吨,其中新产品10个,专用料11个,新产品及专用料比例占聚烯烃产品的89.03%。与去年 |
天津石化聚烯烃新产品专用料产销两旺 天津石化积极研判市场,持续做大高附加值产品产量。一季度,累计生产聚烯烃新产品及专用料72694吨,其中新产品10个,专用料11个,新产品及专用料比例占聚烯烃产品的89.03%。与去年同期相比,产量增加6.97%,实现产销两旺。 他们依托主力产品增产、小牌号高附加值产品跨月生产模式,持续提升新产品及专用料产量。在持续做稳创效利器TJZS2650专用料产量的基础上,对聚乙烯新产品TJVL-1210、TJVL0505、TJLL-1612三个牌号,以及高端中空系列聚丙烯新牌号产品,实现生产一次产量可以销售两个月。仅3月份,聚乙烯三个牌号共生产近1500吨。 他们精心调整新建聚丙烯装置工艺参数,薄壁注塑料PPH-M70和PPH-MP70系列聚丙烯专用料成为主力产品,一季度共生产19200吨,且产量逐月增加。其中,3月份增产8000吨,计划4月份再增产10000吨,成为聚烯烃产品中单月产量最大的产品,增效显著。3月份,聚丙烯薄膜新产品PPH-FH03首次获得2000吨的出口订单。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |
抱歉!该牌号暂无认证数据。
价格走势图
开始时间:
结束时间:
材料厂家:
【牌号齐全,内容全面】
全网共2500+项牌号+上游原料单体+原油价格,最长可追溯近20年价格行情
【精准,及时,权威!】
专业团队挖掘行情信息,第一时间发布行情
抱歉!该牌号暂无认证数据。
免责声明:参考价格是搜料网根据网络大数据拟合分析的结果,仅供参考。实际成交价取决但不限于以下因素:下单时间,付款方式,交货方式,数量,税费,色号,产地,项目信息。
抱歉!暂无数据。
抱歉!暂无数据。