牌号简介 About |
---|
Formolene® HP4000是一种高性能共聚物,设计用于最苛刻的非压力管道应用要求。它具有良好的长期环向强度性能,很高的熔化强度,即使在低温下也具有优异的韧性。Formolene® HP4000符合ASTM D4976-PE 235 Formolene® HP4000的所有要求,符合ASTM F 2160的要求,用于实壁高密度聚乙烯导管基管。 Formolene® HP4000 is a high performance copolymer that is designed for the most demanding requirements of nonpressure pipe applications. It has good long-term hoop strength performance, very high melt strength, and outstanding toughness even at low temperatures. Formolene® HP4000 meets all requirements of ASTM D4976 - PE 235 Formolene® HP4000 meets the requirements of ASTM F 2160 for use in solid wall HDPE conduit based pipe. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.944 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
0.16 | g/10min | ASTM D1238 |
抗环境应力开裂 ESCR(Environmental Stress Cracking Resistance) |
|||
100%非离子洗涤剂,模压成型,F50 100% non-ionic detergent, molded, F50 |
> 1000 | hr | ASTM D1693A |
100%非离子洗涤剂,模压成型,F50 100% non-ionic detergent, molded, F50 |
> 1000 | hr | ASTM D1693B |
100%非离子洗涤剂,模压成型,F50 100% non-ionic detergent, molded, F50 |
> 1000 | hr | ASTM D1693C |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
断裂,模压成型 Fracture, molded 2 |
MPa | ASTM D638 | |
屈服,模压成型 Yield, molding 2 |
MPa | ASTM D638 | |
拉伸应变 Tensile strain 2 |
|||
断裂,模压成型 Fracture, molded 2 |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
模压成型 Compression Molding |
MPa | ASTM D3350 | |
模压成型 Compression Molding |
MPa | ASTM D790 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脆化温度 Embrittlement temperature |
℃ | ASTM D746 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 类型 4, 2.0 in/min |
【新闻资讯】查看全部
首个国家碳计量中心近日落户内蒙古
2022-05-19 近日,国家市场监管总局批准依托内蒙古自治区计量测试研究院筹建国家碳计量中心(内蒙古),该中心成为市场监管总局批准筹建的首个国家碳计量中心。 该中心将通过开展碳计量重大 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |