牌号简介 About |
---|
本产品由一个带有三色旋流帽的HMWPE基板组成。涡流可以在板材的一侧或两侧,厚度可以根据您的具体材料要求和拉伸比进行调整。应用:到目前为止,应用包括操场设备,伪装鹿百叶窗,独木舟和其他体育设备。加工:这是一种结晶性材料,因此,成型本产品时应采用良好的成型工艺。成型温度为310-360°F。模具温度应为160-200°F。首选表面喷砂的铝模具。该工具应在装饰线外侧设计护城河。模具收缩率为0.016-0.028英寸/英寸。表面处理:可以使用诸如钻孔、走线、冲压、锯切和用模具、激光或水射流切割等技术来制造优质的HMWPE 1000涡流。可使用机械螺钉和其他类型的紧固件。CLTE很高,因此必须考虑部件的移动。请联系Primex塑料公司代表,了解有关表面处理、制造或热成型工艺的更多信息。颜色、纹理和功能:Prime HMWPE 1000漩涡颜色可匹配,以满足您的特定要求。Prime HMWPE 1000旋流器采用0.100至0.300英寸的规格挤压而成,最大宽度为90英寸。纹理包括:光滑的或左旋的。 This product consists of a HMWPE substrate with a three-color swirlcap of HMWPE. The swirl can beon one or both sides of the sheet.The thickness can be varied to suityour specific material requirementsand draw ratios. Applications: Applications so far have consisted of playground equipment, camouflage deer blinds, canoes, and other sporting equipment. Processing: This is a crystalline material, therefore, good forming practices should be applied when forming this product. Forming temperature is 310-360°F. Mold temperature should be 160-200°F. Aluminum mold with grit blasted surface is preferred. The tool should be designed with a moat on the outsideof the trim line. Mold shrink is .016 -.028 in/in. Finishing: Prime HMWPE 1000 Swirl can be fabricated by using techniques such as; drilling, routing, punching, sawing and cutting with a die, laser or water jet. Mechanical screws and other type of fasteners can be used. The CLTE is high, therefore, movement of the part must be considered. Please contact your Primex Plastics representative formore information on finishing,fabricating, or the thermoforming process. Colors, Textures and Capabilities: Prime HMWPE 1000 Swirl can be color matched to meet your specific requirements. Prime HMWPE 1000 Swirl is extruded in gauges of .100 to .300 and up to 90" in width.Textures include; Smooth or Levant ll. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.947 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD MD |
1.6 到 2.8 | % | |
抗环境应力开裂 ESCR(Environmental Stress Cracking Resistance) |
|||
F50 F50 |
> 600 | hr | ASTM D1693A |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
24.8 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
> 600 | % | ASTM D638 |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脆化温度 Embrittlement temperature |
℃ | ASTM D746 | |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
> 1.52 mm > 1.52 mm |
FMVSS 302 | ||
阻燃等级 Flame retardant level 2 |
|||
1.50 mm 1.50 mm |
UL 94 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
模具温度 Mold temperature |
|||
other other |
℃ | ||
成型温度 Forming temperature |
℃ |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 >0.060 in |
【新闻资讯】查看全部
塑机行业与“绿色发展”和“食品安全”
2021-05-16 搜料网资讯: 3月3日下午,大众的目光再次聚焦于一年一度的两会,而这中国政治季上的热词早已成火热词条,对于塑料(机械)行业而言,绿色发展和食品安全无疑是一大要点。 绿色 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |