牌号简介 About |
---|
EPIC S7351是一种双组分室温固化聚丁二烯基聚氨酯。S7351是专门为封装电子船用模块(EMM)而设计的,也是封装电子控制模块(ECM)的最佳候选产品。由于其低硬度和灵活性,S7351不会对印刷电路板(PCB)上的精密表面安装设备(SMD)施加压力,当暴露于典型的海洋和汽车电子应用的极端热循环时。S7351是刚性系统的一个很好的替代品,它不允许精密部件的膨胀和收缩而导致故障。S7351具有优异的耐高温性能,最高可达125C,并具有良好的耐化学性。 Epic S7351 is a two component, room temperature cure, polybutadiene based polyurethane. S7351 was specifically formulated for potting electronic marine modules (EMM) and is also an excellent candidate for potting electronic control modules (ECM). Due to its low hardness and flexibility, S7351 will not exert stress on delicate surface mounted devices (SMD) on printed circuit boards (PCB) when exposed to extreme thermal cycling typical of marine and automotive electronics applications. S7351 is an excellent alternative to rigid systems that cause failures by not allowing expansion and contraction of delicate components. S7351 provides excellent high temperature properties up to 125C and good chemical resistance. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.978 到 0.998 | g/cm³ | ASTM D792 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A,25℃ Shore A, 25 ℃ |
20 到 25 | ASTM D2240 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
1.5E+12 到 2.3E+12 | ohms·cm | ASTM D257 |
介电强度 Dielectric strength |
|||
2.79 mm 2.79 mm |
16 到 17 | kV/mm | ASTM D149 |
介电常数 Dielectric constant |
|||
100 kHz 100 kHz |
3.70 到 4.10 | ASTM D2520 | |
耗散因数 Dissipation factor |
|||
100 kHz 100 kHz |
ASTM D150 | ||
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
25℃ 25℃ |
cP | ASTM D2393 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
玻璃化转变温度 Glass transition temperature |
℃ | ASTM E1356 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
|||
储存稳定性 storage stability 2 |
|||
25 ℃ 25 ℃ 2 |
min |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 128 Gram Mass |
【新闻资讯】查看全部
“限塑令”密集出台,可降解塑料概念火了,这一板块蓄势待发
2020-12-02 搜料网资讯: 近日,商务部的一则消息引爆可降解塑料板块行情。 11月30日,商务部发布《商务领域一次性塑料制品使用、回收报告办法(试行)》,鼓励环保替代产品供应商依据本办 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |