牌号简介 About |
---|
TECNOFLON® FOR 7353 是一种中低粘度 固化含氟弹性体共聚物,非常适合需要优异的抗压缩形变和出色的脱模性能的产品。 Tecnoflon® FOR 7353的一些基本特性为: -优异的焦烧安全性 良好的模内流动性 出色的脱模性能 -不会造成模内结垢 -符合FDA要求 TECNOFLON® FOR 7353 可用于O型环、垫圈和密封件的模压及传递模塑成型。可与常规氟弹性体配混料混合。混合设备可用用双辊研磨机或密炼机。 这种材料可以挤塑成软管或型材,也可压延成片材或带材。成品可采用各种橡胶加工方法制备。 一些符合FDA要求的化合物见报告表n ° 2 。 TECNOFLON® FOR 7353 is a medium-low viscosity cure incorporated fluoroelastomer copolymer. Tecnoflon® FOR 7353 is well suited for applications where excellent compression set and superior mold release are required. Some of the properties of Tecnoflon® FOR 7353 are: Very good scorch safety Good mold flow Excellent mold release Lack of mold fouling FDA compliant TECNOFLON® FOR 7353 can be used for compression and transfer moulding of O-rings, gaskets and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers. The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods. Some FDA compliant compounds are reported in the table n° 2. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
门尼粘度 Mooney viscosity 2 |
|||
ML 1+10,121℃ ML 1+10,121℃ 2 |
39 | MU | |
氟含量 Fluorine content 2 |
66 | % |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 聚合物原料 |
【新闻资讯】查看全部
中国PES树脂供应商在北美市场提供产品
2018-04-10 尽管目前有贸易战,中国的PES树脂仍将对美国沿岸地区产生影响。 位于北美的一家高性能工程热塑性塑料的分销商Conventus已经宣布与来自中国的UJU新材料有限公司达成PES的供应。会议将于5月7日至11 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |