牌号简介 About |
---|
CONATHANE® EN-14或EN-14黑色,是一种双组分、未填充、低粘度、快速胶凝、快速固化、柔性聚氨酯弹性体系统,设计用于封装和封装电气和电子组件。CONATHANE® EN-14是Conathane DPEN 8536的非汞版。固化体系具有优异的耐水性、抗热震性和电性能。该系统的初始低粘度允许良好的渗透到良好的绕组。CONATHANE® EN-14是完全透明的,可以很容易地切割以去除有缺陷的部件。可以通过使用更多的液体系统进行维修。CONATHANE® EN-14特别推荐用于在-65°C至130°C的温度范围内工作所需的模块、连接器和装置中封装应变和热敏性设备。它还显示了保形涂层的实用性,可以通过铸造、喷涂或刷涂来应用。无空气喷涂设备可有效使用。 CONATHANE EN-14, or EN-14 Black, is a two-component, unfilled, low viscosity, fast-gelling, fast-curing, flexible polyurethane elastomer system designed for potting and encapsulation of electrical and electronic assemblies. CONATHANE EN-14 is a non-mercury version of CONATHANE® DPEN 8536. The cured system features excellent water resistance, thermal shock resistance, and electrical properties. The initial low viscosity of the system allows good penetration into fine windings. CONATHANE EN-14 is fully transparent and can easily be cut to remove defective components. Repairs can be made by application of more of the liquid system. CONATHANE EN-14 is particularly recommended for potting and encapsulating strain and heat sensitive devices in modules, connectors, and units required to operate in the temperature range of -65°C to 130°C. It also has shown utility as a conformal coating and can be applied by casting, spraying, or brushing. Airless spray equipment can be used effectively. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
-- -- 3 |
0.968 | g/cm³ | |
-- -- 4 |
1.04 | g/cm³ | |
-- -- 5 |
1.10 | g/cm³ | |
吸水率 Water absorption rate |
|||
25℃,24hr 25℃,24hr |
0.40 | % | |
25℃,7days 25℃,7days |
0.79 | % | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
撕裂强度 tear strength |
kN/m | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity 6 |
ohms | ||
体积电阻率 Volume resistivity |
|||
25 ℃ 25 ℃ |
ohms·cm | ||
介电强度 Dielectric strength |
kV/mm | ||
介电常数 Dielectric constant |
|||
25 ℃,100 Hz 25 ℃,100 Hz |
|||
25 ℃,1 MHz 25 ℃,1 MHz |
|||
耗散因数 Dissipation factor |
|||
25℃,100 Hz 25℃,100 Hz |
|||
25℃,1 MHz 25℃,1 MHz |
|||
耐电弧性 Arc resistance |
sec | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热固组件 Thermosetting components |
|||
树脂 resin |
|||
硬化法 Hardening method |
|||
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
25℃ 25℃ 5 |
cP | ||
25℃ 25℃ 3 |
cP | ||
25℃ 25℃ 4 |
cP | ||
胶凝时间 Gelation time |
|||
25℃ 25℃ |
min | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
固化时间 Curing time |
|||
25℃ 25℃ |
day | ||
60℃ 60℃ |
day | ||
冷热冲击测试 Test - 10 cycles,-65℃ to 130℃ Cold and hot shock test -10 cycles, -65 ℃ to 130 ℃ |
|||
工作期限 Working period |
|||
25℃ 25℃ |
min | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Linear Shrinkage Linear Shrinkage |
% | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
|||
拉伸强度 tensile strength |
MPa | ||
拉伸应变 Tensile strain |
|||
断裂 fracture |
% |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Hardener |
3 Mixed |
4 Resin |
5 25°C |
【新闻资讯】查看全部
英国政府赞同制止销售含塑料微珠的美容产品
2016-09-07 据英国《卫报》报道,英国政府已经同意禁止销售含有塑料微珠的美容产品。尽管目前已有一些英国企业停止生产含有微珠的化妆品,但现在英国政府表示他们将强制要求在2017年底前完全淘汰含有塑料微珠的化妆品。此前已有研究表明,在洗面奶、肥皂等日常用品中发现的塑料微珠将对海洋生物产生危害。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |