牌号简介 About |
---|
材料代码符合ISO 1043-1:PA66尼龙66,由40%重量的长玻璃纤维加固。球是圆柱形的,通常也包括10 mm长的嵌入纤维。Celstran成型件具有高强度、高刚度、高热变形等优异的力学性能。由于部件中内置了纤维骨架,因此在高温和低温下缺口冲击强度会增加。长纤维增强能显著降低蠕变。模制品的各向同性收缩使翘曲最小化。通过注射成型,可以制造出具有高再现性的复杂零件。可代替压铸金属,重量轻,无腐蚀问题,无后处理。 Material code according to ISO 1043-1: PA66 Nylon 66 reinforced by 40 weight percent long glass fibers. The pellets are cylindrical and normally as well as the embedded fibers 10 mm long. Parts molded of CELSTRAN have outstanding mechanical properties such as high strength and stiffness combined with high heat deflection. The notched impact strength is increased at elevated and low temperatures due to the fiber skeleton built in the parts. The long fiber reinforcement reduces creep significantly. The very isotropic shrinkage in the molded parts minimizes the warpage. Complex parts can be manufactured with high reproducibility by injection molding. Can be used for substituting die cast metal with the advantage of Weight reduction, no corrosion problems, no post treatment. |
技术参数 Technical Data | |||
---|---|---|---|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
|||
80℃ 80℃ |
7800 | MPa | ISO 527-2/1A |
拉伸强度 tensile strength |
|||
80℃ 80℃ |
135 | MPa | ISO 527-2/1A |
拉伸应变 Tensile strain |
|||
断裂,80℃ Fracture, 80 ℃ |
2.5 | % | ISO 527-2/1A |
弯曲模量 Bending modulus |
ISO 178 | ||
23℃ 23℃ |
11100 | MPa | |
80℃ 80℃ |
7200 | MPa | |
弯曲强度 bending strength |
ISO 178 | ||
23℃ 23℃ |
MPa | ||
80℃ 80℃ |
MPa | ||
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
ISO 179/1eA | ||
-30℃ -30℃ |
kJ/m² | ||
23℃ 23℃ |
kJ/m² | ||
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ISO 180/1A | ||
-30℃ -30℃ |
kJ/m² | ||
23℃ 23℃ |
kJ/m² |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
海天塑机集团与TCL王牌签署战略合作协议
2020-09-05 搜料网资讯: 8月31日,海天塑机集团有限公司与TCL王牌电器(惠州)有限公司在海天通途路事业部举行战略合作框架协议签约仪式。 海天塑机集团总裁张剑峰等重要领导与TCL王牌电器 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |