牌号简介 About |
---|
Lifoflex® UV FLAM 40700 Lifoflex® UV FLAM 40700是一种热塑性弹性体(TPE)材料,。 该产品在欧洲有供货,加工方式为:挤出或注射成型。 Lifoflex® UV FLAM 40700的主要特性有: 阻燃/额定火焰 通过 ROHS 认证 Flame Retardant 附着力强 加工性能良好 典型应用领域包括: 工程/工业配件 电气/电子应用 电线电缆 建筑应用 Lifoflex® UV FLAM 40700 Lifoflex FLAM are a range of halogen-free flame retardant thermoplastic elastomers (TPEs) designed to meet the most demanding applications where resistance to ignition and burning are important features. Lifoflex FLAM compounds contain additives to give them better resistance to burning compared to general TPE grades. The range includes halogen, chlorine and antimony free grades which are low smoke and compliant with the Restriction of Hazardous Substances (RoHS) directives, offering flame retardancy without the use of polybrominated diphenyl ether (PBDE). |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.10 | g/cm³ | ISO 1183/A |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A,3 秒 Shore A, 3 seconds |
40 | DIN 53505 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
流量,屈服 Flow rate, yield |
1.40 | MPa | DIN 53504 |
拉伸应变 Tensile strain |
|||
流量,断裂 Flow rate, fracture |
460 | % | DIN 53504 |
压缩形变 Compression deformation |
ISO 815 | ||
23℃,72 hr 23℃,72 hr |
12 | % | ISO 815 |
70℃,22 hr 70℃,22 hr |
% | ISO 815 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
1.60 mm 1.60 mm |
UL 94 | ||
灼热丝可燃性指数 Glowing wire flammability index |
|||
1.6 mm 1.6 mm |
℃ | IEC 60695-2-12 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
成型透明注塑件需要留意的五大成绩,请查收!
2018-03-28 透明塑料由于透光率要高,必然要求塑料制品表面质量要求严格,不能有任何斑纹、气孔、泛白。雾晕、黑点、变色、光泽不佳等缺陷,因而在整个注塑过程对原料、设备。 模具、甚至产品的设计,都要十分注意和提出严格甚至特殊的要求。其次由于透明塑料多为熔点高、流动性差,因此为保证产品的表面质量,往往要在机高温度、注射压力、注射速度等工艺参数作细微调整,使注塑料时既能充满模,又不会产生内应力而引起产品变形和开裂。 下面就其在原料准备、对设备和模具要求、注塑工艺和产品的原料处理几 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |