牌号简介 About |
---|
Moplen EP440M Moplen EP440M是一种高等规度聚丙烯嵌段共聚物,由PMC在Basell的许可下使用Spheripol工艺生产。Moplen EP440M是一种嵌段共聚物,通常被客户用于电池壳的注射成型。Moplen EP440M Moplen EP440M是一种使用Spheripol工艺制造的高等规度聚丙烯冲击共聚物。该等级以具有最佳刚度和韧性平衡而闻名。特别适用于电池盒的注塑成型。 Moplen EP440M Moplen EP440M is the high isotacticity polypropylene block copolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen EP440M is a block copolymer is typically used by customers for injection molding of battery case. Moplen EP440M Moplen EP440M is a high isotacticity polypropylene impact copolymer with an optimized balance of stiffness and toughness, high impact strength at low temperature, high stiffness and low warpage. Typical customer application is injection molding of battery cases. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
9.0 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ASTM D256 | ||
-20℃,注塑成型 -20 ℃, injection molding |
39 | J/m | ASTM D256 |
23℃,注塑成型 23 ℃, injection molding |
98 | J/m | ASTM D256 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
97 | ASTM D785 | |
拉伸强度 tensile strength |
|||
屈服,注塑成型 Yield, injection molding |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
屈服,注塑成型 Yield, injection molding |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
注塑成型 injection molding |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
嘉兴石化年产200万吨PTA项目试消费
2018-01-09 日前,桐昆集团股份有限公司发布公告称,嘉兴石化年产200万吨PTA项目于近日进入试生产阶段。 项目计划总投资 30.4 亿元人民币,截止 2017 年 11 月底,实际已累计投入资金 28.6 亿元。本项目采用英威达 P8 工艺技术,引进世界先进水平的压缩机、搅拌器等进口设备,并与国产设备进行技术嫁接,建成具备世界先进技术水平的 PTA 生产线。 来 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |