牌号简介 About |
---|
Omnix® LF-4050 BK 000是一种50%长的玻璃纤维增强,易于流动的高性能PA,可以在大多数注塑机上加工。该材料具有极高的机械和热性能,同时易于加工和快速循环。它在高温下具有高强度、刚度和冲击强度;优异的蠕变和疲劳抗力;各向同性的机械性能和降低的各向同性收缩;高剪切强度和高爆破压力;以及优良的表面光洁度。 Omnix® LF-4050 BK 000 is a 50% Long Glass Fiber reinforced, easy-flowing, heat stabilized HPPA with a very high flexural modulus. It exhibits unique stiffness/toughness combination, an excellent retention of properties in a wide temperature range as well as outstanding creep and fatigue resistance. Omnix® LF-4050 BK 000 has a pellet length of 9mm and can be processed on most injection-molding machines. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.59 | g/cm³ | ISO 1183 |
收缩率 Shrinkage rate 2 |
|||
MD MD 2 |
0.10 | % | 内部方法 |
吸水率 Water absorption rate |
|||
平衡,23℃,50% RH Equilibrium, 23 ℃, 50% RH |
1.4 | % | ISO 62 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
|||
23℃ 23℃ |
17000 | MPa | ISO 527-2 |
拉伸强度 tensile strength |
|||
断裂,23℃ Fracture, 23 ℃ |
265 | MPa | ISO 527-2 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ISO 178 | |
弯曲强度 bending strength |
|||
23℃ 23℃ |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
23℃ 23℃ |
kJ/m² | ISO 179 | |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
|||
23℃ 23℃ |
kJ/m² | ISO 179 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ISO 11359-2 | |
导热系数 Thermal conductivity coefficient |
W/m/K | ISO 22007 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
|||
2 mm 2 mm |
kV/mm | IEC 60243-1 | |
相比漏电起痕指数 Compared to the leakage tracing index |
V | IEC 60112 | |
表面电阻率 Surface resistivity |
ohms/sq | ASTM D257 |
备注 |
---|
2 Tested in accordance with S.O.P. methods |
【新闻资讯】查看全部
宝理塑料扩大其LCP和POM产能
2021-03-09 搜料网资讯: 宝理塑料(Poly plastics)预计6G通信时代的强劲需求将在未来成为现实,因此正在考虑加强其液晶聚合物(LCP)生产。目前的目标是加强该公司在其主要亚洲市场的地位,计划20 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |