物性表自定义
公司信息及水印
公司信息及水印
下载中文物性表
下载英文物性表
邮件发送/他人
| 牌号简介 About |
|---|
| Eastar™ BR203共聚酯含有脱模剂。它外观极好，几乎是水清澈的。其最突出的特点是耐化学性和加工能力。暴露在芳香油中通常会导致许多聚合物树脂开裂或实际断裂，但当暴露在这些油中时，BR203保持其物理性能，其外观几乎不变。BR203是专门为提供最佳组合的耐化学性，鬃毛保留，强度，硬度，韧性，加工性，清晰度，着色性和感觉牙刷。根据现行的美国食品药品监督管理局（FDA）法规，Eastar™ BR203共聚酯可合法用于制造符合21 CFR 177.1240规范和使用条件的食品接触物品。本产品已通过绿色卫士室内空气质量认证。Greenguard室内空气质量认证标志是通过Greenguard环境研究所（GEI）许可使用的注册认证标志。GEI是一个行业独立的非盈利组织，负责监督Greenguard认证计划。Greenguard认证计划是一个行业独立的第三方测试计划，用于室内环境的低排放产品和材料。欲了解更多关于GEI的信息，并获得Eastman共聚酯的可打印证书，请访问www.greenguard.org。在制造商类别下选择Eastman Chemical Company，然后单击搜索以显示我们的产品列表。 Eastar™ BR203 Copolyester contains a mold release additive. It has excellent appearance and is nearly water-clear. Its most outstanding features are its chemical resistance and processing capabilities. Exposure to aromatic oils often causes crazing or actual fracture of many polymer resins, but BR203 maintains its physical properties when exposed to these oils, and its appearance is virtually unchanged. BR203 is specifically formulated to provide the optimal combination of chemical resistance, bristle retention, strength, stiffness, toughness, processability, clarity, colorability, and feel for toothbrushes. Under existing United States Food and Drug Administration (FDA) regulations, Eastar™ BR203 copolyester may lawfully be used to make food contact articles which comply with the specifications and conditions of use in 21 CFR 177.1240. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products. |
产品描述 Product Description
用途：牙刷柄;个人护理;
颜色：自然色
加工条件：注射成型 Injection Molding
性能特点： 机械强度好; 含脱模剂; 着色性好; 耐化学性; 透光性好; 食品接触; 表面光泽度好; 韧性好; 易加工; Good Rigidity,Excellent Processability,Good Clarity,Good flexibility,Good surface appearance,Good stripping performance,Food contact compliance,Solvent resistance,Good coloring
| 技术参数 Technical Data | |||
|---|---|---|---|
|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
密度 Density |
1.20 | g/cm³ | ASTM D792 |
|
密度 Density |
1.19 | g/cm³ | ISO 1183 |
|
收缩率 Shrinkage rate |
|||
|
MD：3.2 mm MD：3.2 mm |
0.20 to 0.60 | % | ASTM D955 |
|
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ASTM D256 | ||
|
-40℃ -40℃ |
60 | J/m | ASTM D256 |
|
23℃ 23℃ |
370 | J/m | ASTM D256 |
|
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ISO 180 | ||
|
-40℃ -40℃ |
kJ/m² | ISO 180 | |
|
23℃ 23℃ |
kJ/m² | ISO 180 | |
|
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ASTM D4218 | ||
|
-40℃ -40℃ |
ASTM D4218 | ||
|
23℃ 23℃ |
ASTM D4218 | ||
|
装有测量仪表的落镖冲击 Dart impact equipped with measuring instruments |
ASTM D3763 | ||
|
-40℃，Energy at Peak Load -40℃，Energy at Peak Load |
J | ASTM D3763 | |
|
23℃，Energy at Peak Load 23℃，Energy at Peak Load |
J | ASTM D3763 | |
|
多轴向仪器化冲击能量 Multi axial instrumented impact energy |
ISO 6603-2 | ||
|
-40℃，能量到力量峰值 -40 ℃, energy to peak strength |
J | ISO 6603-2 | |
|
23℃，能量到力量峰值 23 ℃, energy to peak strength |
J | ISO 6603-2 | |
|
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
热变形温度 Hot deformation temperature |
|||
|
1.8 MPa，未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
|
1.8 MPa，未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
|
0.45 MPa，未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
|
0.45 MPa，未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
|
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
透光率 Transmittance |
ASTM D1003 | ||
|
Regular Regular |
% | ASTM D1003 | |
|
总计 total |
% | ASTM D1003 | |
|
雾度 Haze |
% | ASTM D1003 | |
|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
拉伸强度 tensile strength |
|||
|
断裂，23℃ Fracture, 23 ℃ |
MPa | ISO 527-2 | |
|
断裂，23℃ Fracture, 23 ℃ |
MPa | ASTM D638 | |
|
屈服，23℃ Yield, 23 ℃ |
MPa | ISO 527-2 | |
|
屈服，23℃ Yield, 23 ℃ |
MPa | ASTM D638 | |
|
拉伸应变 Tensile strain |
|||
|
断裂，23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
|
断裂，23℃ Fracture, 23 ℃ |
% | ISO 527-2 | |
|
屈服，23℃ Yield, 23 ℃ |
% | ASTM D638 | |
|
屈服，23℃ Yield, 23 ℃ |
% | ISO 527-2 | |
|
弯曲模量 Bending modulus |
|||
|
23℃ 23℃ |
MPa | ISO 178 | |
|
23℃ 23℃ |
MPa | ASTM D790 | |
|
弯曲强度 bending strength |
|||
|
屈服，23℃ Yield, 23 ℃ |
MPa | ASTM D790 | |
|
23℃ 23℃ |
MPa | ISO 178 | |
|
洛氏硬度 Rockwell hardness |
|||
|
R 级 R-level |
ASTM D785 | ||
| 备注 |
|---|
| 1 一般属性：这些不能被视为规格。 |
|
【新闻资讯】查看全部 
MIDO 2017：赢创推出TROGAMID®透明聚酰胺产品
2017-01-22 赢创工业集团将在今年意大利米兰举办的国际眼镜展览会(MIDO)上推出一款创新的镜框制作技术：基于高性能透明尼龙材料TROGAMID®的IMPLEX产品，这款产品赋予眼镜制造商更大的设计自由度。 |
|
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。 |
当前牌号已加入对比
支付宝
微信支付