物性表自定义
公司信息及水印
公司信息及水印
下载中文物性表
下载英文物性表
邮件发送/他人
| 牌号简介 About |
|---|
| Boltaron 1050E 1型PVC是一种挤压、耐腐蚀、耐火的板材，具有正常的抗冲击性，适用于制造、加工和热成型应用。因为它是一个整体结构，被挤压到所需的厚度（不是粘合层），所以它不受分层的影响。由于Boltaron 1050E在整个pH范围内对严酷的化学物质也是惰性的，因此它特别适用于处理酸和腐蚀剂的应用。因为它不像不锈钢和高合金那样离子化，所以它也非常适用于超纯水、试剂级化学品或其他污染敏感产品的应用。Boltaron 1050E页的长度为96英寸。（2438毫米），宽度为48英寸。（1219 mm），厚度为0.060至1 in.（1.52至25.4 mm），以及定制的毛坯尺寸。两面光滑，无杂质，可从深灰色库存中购买，并提供定制颜色、定制尺寸和/或聚乙烯遮蔽（最低要求较低）。该表具有UL 94 V-0防火等级，符合ASTM D-1784标准，适用于广泛的应用要求。Boltaron 1050E易于使用常规工具进行锯切、钻孔、攻丝、布线和其他机械加工，可以进行制动成型（更薄的仪表）、热焊接和粘合剂粘合和机械紧固，允许快速制造各种高完整性零件和总成。 Boltaron 1050E Type 1 PVC is an extruded, corrosion resistant, fire rated sheet with normal impact resistance for fabricating, machining and thermoforming applications. Because it is a monolithic structure that is extruded to desired thicknesses (not bonded laminations) it is not subject to delamination. Since Boltaron 1050E is also inert to harsh chemicals across the entire pH range, it is especially suited to applications in which acids and caustics are handled. And because it does not ionize like stainless steel and high alloys, it is also ideal for applications involving ultrapure water, reagent-grade chemicals or other contamination-sensitive products. Boltaron 1050E sheet is offered in lengths to 96 in. (2438 mm), widths to 48 in. (1219 mm) and thicknesses from .060 to 1 in.(1.52 to 25.4 mm), as well as in custom blank sizes. Smooth on both sides and free of inclusions, it is available from stock in dark gray, and offered in custom colors, custom sizes, and/or with poly masking (low minimums). The sheet carries a UL 94 V-0 fire rating and conforms to ASTM D-1784 standards, making it suitable for a wide range of application requirements. Boltaron 1050E is readily sawn, drilled, tapped, routed and otherwise machined using conventional tools, and can be brake formed (thinner gauges), heat welded and adhesive bonded and mechanically fastened, allowing rapid fabrication of a broad range of high-integrity parts and assemblies. |
产品描述 Product Description
用途：衬里;机器/机械部件;工用水箱;
颜色：可用颜色,深灰色
加工条件：机器加工
性能特点： 防火阻燃等级V-0; 耐腐蚀; 耐酸; 耐化学性; 冲击性能好; 表面光泽度好; Good surface appearance,High impact resistance,Corrosion Resistant,Acidproof,Solvent resistance,V-0
| 技术参数 Technical Data | |||
|---|---|---|---|
|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
密度 Density |
1.48 | g/cm³ | ASTM D792 |
|
吸水率 Water absorption rate |
|||
|
24hr 24hr |
0.032 | % | ASTM D570 |
|
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
53 到 160 | J/m | ASTM D256 |
|
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
热变形温度 Hot deformation temperature |
|||
|
1.8 MPa，未退火 1.8 MPa, unannealed |
68.9 | ℃ | ASTM D648 |
|
维卡软化温度 Vicat Softening Temp |
34.4 | ℃ | ASTM D1525 |
|
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
|
MD MD |
1/℃ | ASTM D696 | |
|
比热 specific heat |
J/kg/℃ | ASTM C351 | |
|
导热系数 Thermal conductivity coefficient |
W/m/K | ASTM C177 | |
|
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
|
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
|
介电常数 Dielectric constant |
|||
|
60 Hz 60 Hz |
ASTM D150 | ||
|
耗散因数 Dissipation factor |
|||
|
60 Hz 60 Hz |
ASTM D150 | ||
|
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
阻燃等级 Flame retardant level |
UL 94 | ||
|
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
Loss Index Loss Index |
ASTM D150 | ||
|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
邵氏硬度 Shore hardness |
|||
|
邵氏 D Shaw's D |
ASTM D2240 | ||
|
洛氏硬度 Rockwell hardness |
|||
|
R 级 R-level |
ASTM D785 | ||
|
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
|
拉伸强度 tensile strength |
MPa | ASTM D638 | |
|
拉伸应变 Tensile strain |
ASTM D638 | ||
|
屈服 yield |
% | ASTM D638 | |
|
断裂 fracture |
% | ASTM D638 | |
|
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
|
弯曲强度 bending strength |
MPa | ASTM D790 | |
|
压缩强度 compressive strength |
MPa | ASTM D695 | |
|
剪切强度 shear strength |
MPa | ASTM D732 | |
| 备注 |
|---|
| 1 一般属性：这些不能被视为规格。 |
|
【新闻资讯】查看全部 
|
|
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。 |
当前牌号已加入对比
支付宝
微信支付