牌号简介 About |
---|
透明,UV固化胶粘剂以前为88-190A Clear, UV curable adhesive Formerly 88-190A |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density 1 |
1.91 | g/cm³ | |
表观密度 Apparent density 2 |
1.00 | g/cm³ | |
螺旋流动长度 Spiral flow length |
69.0 | cm | |
收缩率 Shrinkage rate |
|||
MD MD |
0.50 | % | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
32 | J/m | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | ||
体积电阻率 Volume resistivity |
ohms·cm | ||
介电强度 Dielectric strength 3 |
|||
3.18 mm 3.18 mm 3 |
kV/mm | ||
介电常数 Dielectric constant |
|||
1 kHz 1 kHz |
|||
耗散因数 Dissipation factor |
|||
1 kHz 1 kHz |
|||
耐电弧性 Arc resistance |
sec | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Loss Factor(1 kHz) Loss Factor(1 kHz) |
|||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
固化时间 Curing time |
|||
150℃ 150℃ 5 |
hr | ||
150℃ 150℃ |
hr | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
|||
拉伸强度 tensile strength |
MPa | ||
弯曲强度 bending strength |
MPa | ||
压缩强度 compressive strength |
MPa | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ||
导热系数 Thermal conductivity coefficient |
W/m/K | ||
最高工作温度 Maximum operating temperature |
|||
Intermittent Intermittent |
℃ | ||
贮藏期限 Storage period 4 |
|||
5℃ 5℃ |
wk | ||
25℃ 25℃ |
wk | ||
35℃ 35℃ |
wk |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Below Tg |
3 Above Tg |
4 589 nm (uncured) |
5 589 nm (cured) |
6 100 rpm |
【新闻资讯】查看全部
天原股份、中能氢储开展氢能储运合作
2021-11-20 搜料网资讯: 11月15日,天原股份发布公告,公司与中能氢储(北京)能源工程研究院有限责任公司签订《战略合作框架协议》,双方将利用各自优势在氢能储运等方面开展深度合作。 据了 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |