牌号简介 About |
---|
830GHI是一种冲击改性,30%玻璃纤维增强,热稳定等级的PA612。它具有良好的机械强度和低吸湿性。 830GHI is an impact modified, 30% glass fibre reinforced, heat stabilised grade of PA612. It offers good mechanical strength and low moisture absorption. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density Density |
1.27 | g/cm³ | ISO 1183 |
成型收缩率 Molding Shrinkage Molding shrinkage |
1.0 到 1.2 | % | 内部方法 |
吸水率 Water Absorption Water Absorption |
|||
平衡 equilibrium,23℃,50% RH Balanced Equilibrium, 23 ℃, 50% RH |
0.80 | % | ISO 62 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 Tensile Strength Tensile Strength |
133 | MPa | ISO 527-2 |
拉伸应变 Tensile Strain Tensile Strain |
|||
断裂 brk Broken BRK |
4.0 | % | ISO 527-2 |
弯曲模量 Flexural Modulus Flexural Modulus |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Izod Notched Impact strength Izod Notched Impact strength |
kJ/m² | ISO 180/A | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 HDT Hot deformation temperature HDT |
|||
1.8 MPa,未退火 unannealed 1.8 MPa, unannealed |
℃ | ISO 75-2/A |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Mould shrinkage is significantly influenced by many factors including wall thickness, gating, moulding shape and processing conditions. The range values given are determined from specimen bar mouldings of 1.5mm to 4mm wall thickness. They are provided as a guide for comparison purposes only and no guarantee should be inferred from their inclusion. (Specimens measured in the dry state, 24 hours after moulding). |
【新闻资讯】查看全部
重磅!拜登暂停3700亿美元中国商品加征关税!原料春节后上涨有戏!
2021-02-03 搜料网资讯: 据路透社华盛顿消息,当地时间1月29日,美国拜登政府将重新评估前总统特朗普时期的国家安全措施,其中包括中美第一阶段经贸协议。 暂停3700亿美元关税! 据网易新闻 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |