牌号简介 About |
---|
Premier PI160K是一种抗冲击共聚物聚丙烯,具有很高的柔韧性和强度。该树脂被认为是“不间断的”。符合21 CFR 177.1520中规定的美国食品和药品管理局的所有要求,包括聚烯烃制品和用于直接接触食品的制品的成分的安全使用。 Premier PI160K is an impact copolymer polypropylene that exhibits high flexibility and strength. The resin is considered "No break." Meets all requirements of the U. S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
17 | g/10min | ASTM D1238 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
屈服 yield 2 |
19.3 | MPa | ASTM D638 |
拉伸应变 Tensile strain 2 |
|||
屈服 yield 2 |
7.0 | % | ASTM D638 |
弯曲模量 Bending modulus 3 |
|||
1% 正割 1% secant 3 |
965 | MPa | ASTM D790 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
无断裂 | ASTM D256 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 2.0 in/min |
3 0.051 in/min |
【新闻资讯】查看全部
恩格尔初次在K 2019展出iQ重量控制智能辅助零碎,用于注塑成型
2019-08-29 在K2019,恩格尔将展示其iQ重量控制智能辅助系统,用于注塑成型工艺和再生材料应用。 iQ重量控制可在注射过程中单独调整每次注射的质量相关工艺参数,以适应当前的条件。 自2014年 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |