物性表自定义
公司信息及水印
公司信息及水印
下载中文物性表
下载英文物性表
邮件发送/他人
| 牌号简介 About |
|---|
| Bormed™ RB845MO是一种用于吹塑的无规共聚物，具有良好的透明度和接触透明度，非常好的光泽和表面光洁度。由于热变形温度（HDT），高达2升的瓶子可以进行蒸汽灭菌。该等级还具有较高的热变形温度。这一级别的产品也可以由IBM生产。 Bormed RB845MO is a resin intended for evaluation for use in Healthcare applications. Bormed RB845MO is a random copolymer for use in blow moulding, including BFS technology, and ISBM ( 1-stage process) technologies. It can be used for ampoules and bottles up to maximum of 2 litres resulting in a good contact clarity, gloss and surface finish. The bottles can be steam sterilised at 121 °C. Material can also be sterilised with ethylene oxide. Applications Bormed RB845MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed RB845MO . Ampoules/small bottles for eye, ear & nose drops Bottles for IV-solutions Bottles/ampoules for injectable solutions This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure. |
产品描述 Product Description
用途：包装;容器;瓶子;药品包装;
颜色：清晰/透明
加工条件：挤出 Extrusion
性能特点： 可回收; 蒸汽消毒; 耐高温; 透光性好; 无规共聚物; 表面光泽度好; Good Clarity,Good surface appearance,Steam sterilized,Renewable resources,High Heat Resistance,Random copolymer
| 技术参数 Technical Data | |||
|---|---|---|---|
|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
密度 Density |
0.902 | g/cm³ | ISO 1183 |
|
熔体质量流动速率 Melt Flow Rate |
|||
|
230℃，2.16kg 230℃，2.16kg |
1.9 | g/10min | ISO 1133 |
|
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
|
23℃ 23℃ |
7.0 | kJ/m² | ISO 179/1eA |
|
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
热变形温度 Hot deformation temperature |
|||
|
0.45 MPa，未退火 0.45 MPa, unannealed |
83.0 | ℃ | ISO 75-2/B |
|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
洛氏硬度 Rockwell hardness |
|||
|
R 级 R-level |
83 | ISO 2039-2 | |
|
拉伸模量 Tensile modulus |
MPa | ISO 527-1-2 | |
|
拉伸强度 tensile strength |
|||
|
屈服 yield |
MPa | ISO 527-2/50 | |
|
拉伸应变 Tensile strain |
|||
|
屈服 yield |
% | ISO 527-2/50 | |
| 备注 |
|---|
| 1 一般属性：这些不能被视为规格。 |
|
【新闻资讯】查看全部 
滨化股份上半年净利润9.75亿元 同比增长5492.42%
2021-07-24 搜料网资讯： 7月22日晚间，滨化股份发布2021年半年度业绩快报，公告显示：2021年1-6月营业总收入为43.19亿元，比上年同期增长58.75%；归属于上市公司股东的净利润为9.75亿元，比上年同 |
|
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。 |
当前牌号已加入对比
支付宝
微信支付