牌号简介 About |
---|
Rulon® 123是一种光滑的黑色非研磨性化合物,用于较软的配合面,如不锈钢。该材料具有优异的耐化学性,符合FDA和USDA标准。它比Rulon J便宜,但柔韧性稍差,磨损更大。它具有高抗变形性、低摩擦系数和良好的热、静电耗散性。该材料的最高工作温度为550°F(300°C)。Rulon® 123随着时间的推移会释放黑色磨损碎屑,不应用于超干、真空应用或需要电绝缘的地方。 Rulon® 123 is a glossy black non-abrasive compound for softer mating surfaces, such as stainless steel. This material has excellent chemical resistance and is FDA and USDA compliant. It is less expensive than Rulon J, but is slightly less flexible and higher in wear. It has a high resistance to deformation, low coefficient of friction and good thermal and electrostatic dissipation. This material has a maximum operating temperature of 550°F (300°C). Rulon 123 releases black wear debris over time and should not be used in ultra-dry, vacuum applications, or where electrical insulation is desired. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
2.10 | g/cm³ | ASTM D792 |
吸水率 Water absorption rate |
|||
24hr 24hr |
0.00 | % | ASTM D570 |
饱和 saturated |
0.00 | % | ASTM D570 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔融温度 Melting temperature |
327 | ℃ | ASTM D3418 |
导热系数 Thermal conductivity coefficient |
0.663 | W/m/K | JIS R2618 |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
TD TD |
1/℃ | ASTM D696 | |
最大操作温度 Maximum operating temperature |
℃ | ||
最低服务温度 Minimum service temperature |
℃ | ||
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
J/m | ASTM D256 | |
限制压力速度 Limiting pressure and speed |
MPa-m/s | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
ASTM D2240 | ||
拉伸强度 tensile strength |
|||
23℃ 23℃ |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
摩擦系数 friction coefficient |
|||
静态 static state |
|||
抗压强度 compressive strength |
MPa | ASTM D-882 | |
特殊值 |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
动态 dynamic |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
【医疗保健】索尔维产品直击医疗和健康的核心
2020-09-11 搜料网资讯: 索尔维产品直击医疗和健康的核心 全世界范围内,越来越多的人正在寻求获得高质量的医疗服务。事实上,随着医疗市场以每年6%的预期速度增长,到2020年底,预计全球 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |