牌号简介 About |
---|
Geon™ Vinyl Rigid Molding M5100是一种刚硬聚氯乙烯产品,。 它,在北美洲、非洲和中东、拉丁美洲、欧洲或亚太地区有供货。 Geon™ Vinyl Rigid Molding M5100的应用领域包括水管/管道/饮用水 和 户外应用。 Geon™ Vinyl Rigid Molding M5100 is a Rigid Polyvinyl Chloride product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Geon™ Vinyl Rigid Molding M5100 include plumbing/piping/potable water and outdoor applications. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.40 | g/cm³ | ASTM D792 |
螺旋流动长度 Spiral flow length |
55.9 | cm | |
收缩率 Shrinkage rate |
|||
MD MD |
0.20 到 0.50 | % | ASTM D955 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ASTM D256A | ||
0℃,3.2mm,注塑成型 0 ℃, 3.2mm, injection molding |
27 | J/m | ASTM D256-A |
23℃,3.2mm,注塑成型 23 ℃, 3.2mm, injection molding |
110 | J/m | ASTM D256-A |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
1.8 MPa,未退火,6.35 mm 1.8 MPa, unannealed, 6.35 mm |
℃ | ASTM D648 | |
1.8 MPa,退火,6.35 mm 1.8 MPa, annealed, 6.35 mm |
℃ | ASTM D648 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 2.0 in/min |
【新闻资讯】查看全部
日本4月化学品出口增长28.5%
2021-05-21 搜料网资讯: 据ICIS网站5月20日报道 周四公布的官方数据显示,日本4月份化学品出口同比增长28.5%,至9550亿日元(88亿美元),支撑了海外出货量的整体增长。 日本经济产业省(METI)在 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |