牌号简介 About |
---|
优异的电气性能高成型基体高TG阻燃剂UL94V-0额定OSU 65/65兼容优异的粘合性能 Superior Electrical Properties Highly Formable Matrix High Tg Flame Retardant UL94 V-0 Rated OSU 65/65 Compliant Excellent Adhesive Performance |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.28 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
380℃,8.40kg 380℃,8.40kg |
35 到 45 | g/10min | ASTM D1238 |
收缩率 Shrinkage rate |
|||
MD MD |
< 0.50 | % | ASTM D955 |
吸水率 Water absorption rate |
|||
24hr 24hr |
< 0.20 | % | ASTM D570 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
48 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
玻璃化转变温度 Glass transition temperature |
℃ | DSC | |
熔融温度 Melting temperature |
℃ | DSC | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD:< 154℃ MD:< 154℃ |
1/℃ | ASTM D696 | |
导热系数 Thermal conductivity coefficient |
W/m/K | ASTM C177 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | ASTM D257 | |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
|||
1 kHz 1 kHz |
ASTM D150 | ||
耗散因数 Dissipation factor |
|||
1 kHz 1 kHz |
ASTM D150 | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
M 级 M-level |
ASTM D785 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
ASTM D638 | ||
断裂 fracture 2 |
MPa | ASTM D638 | |
断裂 fracture 3 |
MPa | ASTM D638 | |
断裂 fracture 4 |
MPa | ASTM D638 | |
断裂 fracture 5 |
MPa | ASTM D638 | |
断裂 fracture 6 |
MPa | ASTM D638 | |
断裂 fracture |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
|||
屈服 yield |
MPa | ASTM D790 | |
压缩强度 compressive strength |
MPa | ASTM D695 | |
摩擦系数 friction coefficient |
|||
与自身 - 静态 With oneself - static |
ASTM D1894 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Stainless Steel |
3 Steel |
4 Galvanized Steel |
5 Aluminum |
6 Anodized Aluminum |
【新闻资讯】查看全部
康菲石油剥离印尼资产
2021-12-19 搜料网资讯: 12月8日,康菲石油公司宣布,该公司已同意以14亿美元的价格将其剩余的印度尼西亚资产出售给当地的石油和天然气公司Medco Energi。该交易包括康菲石油公司在印度尼西亚 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |