牌号简介 About |
---|
Megatron® 100L-MOS2是一种通用润滑聚酰胺6/6树脂,用于注塑成型。在这一级别的威震天中加入二硫化钼(MoS2),使这种独特的化合物具有额外的承载和磨损能力,同时仍保持其冲击强度和韧性。”莫莉“还补充说:低表面摩擦,增加表面硬度,增加耐热性,更高的拉伸性能,和我们的标准级未填充尼龙提高尺寸稳定性。 Megatron® 100L-MOS2 is a general purpose, lubricated, polyamide 6/6 resin used for injection molding. The addition of molybdenum disulfide (MOS2) in this grade of Megatron® gives this unique compound additional load-bearing and wear capabilities while still maintaining its impact strength and toughness. "Molly" also adds; low surface friction, increased surface hardness, increased heat resistance, higher tensile properties, and improved dimensional stability over our standard grade of un-filled nylon. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.15 | g/cm³ | ISO 1183 |
收缩率 Shrinkage rate |
1.5 到 3.0 | % | ISO 294-4 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
3100 | MPa | ISO 527-2 |
拉伸强度 tensile strength |
|||
屈服 yield |
82.0 | MPa | ISO 527-2 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
40 | % | ISO 527-2 |
弯曲模量 Bending modulus |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
ISO 179/1eA | ||
-30℃ -30℃ |
kJ/m² | ||
23℃ 23℃ |
kJ/m² | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
熔融温度 Melting temperature |
℃ | ISO 11357-3 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
印媒:20年来,中国创下“无法形容的巨大增长”
2021-11-26 搜料网资讯: 9月5日,天津港集装箱码头。德新社报道称,中国8月、9月强劲的出口数据令专家们印象深刻。 中国已经超过美国,成为世界上最富有的国家。印度印度新闻网(IN)11月 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |