牌号简介 About |
---|
本材料为40%碳纤维增强聚醚醚酮(PEEK),具备良好的耐磨性,导电性,自润滑性,热稳定性和优良的耐腐蚀性,可以应用在航空航天及精密电子件产品。 |
技术参数 Technical Data | |||
---|---|---|---|
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Izod Notched Impact strength Izod Notched Impact strength |
|||
23℃ 23℃ |
10 | kJ/m² | ISO 180-A |
悬臂梁无缺口冲击强度 Izod Unnotched Impact strength Izod Unnotched Impact strength of cantilever beam |
|||
23℃ 23℃ |
45 | kJ/m² | ISO 180 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
玻璃化转变温度 Glass Transition Temperature Glass Transition Temperature |
143 | ℃ | ISO 3146 |
熔融温度 Melting temperature Melting temperature |
343 | ℃ | ISO 11357-3 |
线性热膨胀系数 Coeff.of linear therm expansion Coeff. of linear thermal expansion |
ISO 11359-2 | ||
MD:< 143℃ MD:< 143℃ |
5.0E-6 | 1/℃ | |
MD:> 143℃ MD:> 143℃ |
1/℃ | ||
TD:< 143℃ TD:< 143℃ |
1/℃ | ||
TD:> 143℃ TD:> 143℃ |
1/℃ | ||
比热容 Specific heat capacity Specific heat capacity |
J/kg/℃ | DSC | |
电气性能 ELECTRICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume Resistivity Volume Resistance |
|||
23℃ 23℃ |
ohms·cm | ASTM D4496 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
灼热丝可燃性指数GWFI Glow Wire Flammability Index GWFI |
|||
2.0 mm 2.0 mm |
℃ | IEC 60695-2-12 | |
毒性 toxicity Toxicity |
NES 713 | ||
CO Content CO Content |
|||
CO2 Content CO2 Content |
|||
Total Gases Total Gases |
|||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness Shore hardness |
|||
邵氏 D,23℃ Shore D, 23 ℃ |
ISO 868 | ||
拉伸模量 Tensile Modulus Tensile Modulus |
|||
23℃ 23℃ |
MPa | ISO 527-2 | |
拉伸强度 Tensile Strength Tensile Strength |
|||
断裂 brk,23℃ Broken BRK, 23 ℃ |
MPa | ISO 527-2 | |
拉伸应变 Tensile Strain Tensile Strain |
|||
断裂 brk,23℃ Broken BRK, 23 ℃ |
% | ISO 527-2 | |
弯曲模量 Flexural Modulus Flexural Modulus |
|||
23℃ 23℃ |
MPa | ISO 178 | |
弯曲强度 Flexural Strength Flexural Strength |
|||
23℃ 23℃ |
MPa | ISO 178 | |
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density Density |
g/cm³ | ISO 1183 | |
螺旋流动长度 spiral flow length Spiral flow length |
cm | 内部方法 | |
成型收缩率 Molding Shrinkage Molding shrinkage |
ISO 294-4 | ||
TD TD |
% | ||
MD:200℃ MD:200℃ |
% | ||
吸水率 Water Absorption Water Absorption |
ISO 62 | ||
23℃,24hr,3.20 mm 23℃,24hr,3.20 mm |
% | ||
平衡,23℃,50% RH,3.20 mm Equilibrium, 23 ℃, 50% RH, 3.20 mm |
% | ||
表观粘度 Apparent viscosity Apparent viscosity |
|||
400℃ 400℃ |
Pa·s | ISO 11443 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Crystalline |
3 模具温度: 392°F, 熔体温度: 761°F |
4 1 mm |
5 405°C nozzle, 200°C tool |
6 Onset |
7 Midpoint |
8 1V |
【新闻资讯】查看全部
带你了解五大抗菌塑料的制备方法工艺
2017-02-07 01、直接添加混炼法 直接添加混炼法就是将抗菌剂添加到塑料中,混合均匀后直接进行成型加工,制备得到相应的抗菌塑料制品。直接添加法操作简单,抗菌剂添加量也可以准确控制,缺点是抗菌剂在抗菌制品中总体分布虽然均匀,但抗菌剂在塑料基材中的分散性受材料、抗菌剂的向相容性及加工工艺的限制,往往抗菌剂是以一定的团聚体分布在塑料基材中,分散性能差,因此相对抗菌性能较差。 02、抗菌剂母粒化法 为了避免直接添加法制备的抗菌制品中宏观均匀、微观分散性差的问题,可 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |