牌号简介 About |
---|
Isoplast 2540是一种用于医疗应用的工程热塑性聚氨酯树脂 |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
成型收缩率 Molding Shrinkage Molding shrinkage |
0.1-0.3 | % | ASTM D955 |
吸水率 Water Absorption Water Absorption |
|||
比重 Specific Gravity Specific Gravity |
1.51 | ASTM D792 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 Tensile Strength Tensile Strength |
|||
屈服 yld Yield yld |
190 | MPa | ASTM D638 |
断裂 brk Broken BRK |
190 | MPa | ASTM D638 |
拉伸伸长率 Tensile Elongation Tensile Elongation |
|||
屈服 yld Yield yld |
6 | % | ASTM D638 |
断裂 brk Broken BRK |
% | ASTM D638 | |
拉伸模量 Tensile Modulus Tensile Modulus |
MPa | ASTM D638 | |
弯曲强度 Flexural Strength Flexural Strength |
MPa | ASTM D790 | |
弯曲模量 Flexural Modulus Flexural Modulus |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁冲击强度 Izod Impact strength Izod Impact strength of cantilever beam |
|||
3.2 mm,23℃ 3.2 mm,23℃ |
j/m | ASTM D-256 | |
3.2 mm,-40℃ 3.2 mm,-40℃ |
j/m | ASTM D-256 | |
装有测量仪表的落镖冲击 Dart impact equipped with measuring instruments |
|||
23℃ 23℃ |
J | ||
-29℃ -29℃ |
J | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 HDT Hot deformation temperature HDT |
|||
1.8 MPa,未退火 unannealed 1.8 MPa, unannealed |
℃ | ASTM D648 | |
1.8 MPa,退火 annealed 1.8 MPa, annealed |
℃ | ASTM D648 | |
维卡软化温度 Vicat Softening Temperature Vicat Softening Temperature |
℃ | ASTM D1525 | |
线性热膨胀系数 Coeff.of linear therm expansion Coeff. of linear thermal expansion |
×10-5/K | ASTM D696 |
备注 | |||
---|---|---|---|
暂无数据 |
【新闻资讯】查看全部
威立雅与佛吉亚达成合作,旨在到2025年在汽车内饰使用30%再生塑料
2022-05-10 近日,威立雅( Veolia )和佛吉亚( FAURECIA )建立了合作伙伴关系,旨在到2025年在汽车内饰中平均使用30%的再生塑料,这家法国回收公司和汽车零部件制造商在一份联合声明中表示。 此次合作将 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |