牌号简介 About |
---|
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.22 | ASTM D792 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
39 | MPa | ASTM D638 |
拉伸模量 Tensile modulus |
2060 | % | ASTM D638 |
弯曲强度 bending strength |
|||
屈服 yield |
64 | MPa | ASTM D790 |
弯曲模量 Bending modulus |
2060 | MPa | ASTM D790 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,6.4 mm 0.45 MPa,6.4 mm |
℃ | ASTM D648 | |
相对温度指数 Relative temperature index |
|||
电气性能 Electrical performance |
℃ | UL 746B | |
冲击机械性能 Impact mechanical performance |
℃ | UL 746B | |
非机械冲击性能 Non mechanical impact performance |
℃ | UL 746B | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
J/m | ASTM D256 | |
仪器冲击能量峰值(23°C) Instrument impact energy peak (23 ° C) |
J | ASTM D 3763 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
耐电弧性 Arc resistance |
|||
钨丝 Tungsten wire |
PLC Code | ASTM D495 | |
热丝引燃{PLC} |
PLC Code | UL 746A | |
高电压电弧起痕速率 {PLC} High voltage arc marking rate {PLC} |
PLC Code | UL 746A | |
高电流电弧引燃,表面{PLC} High current arc ignition, surface {PLC} |
PLC Code | UL 746A | |
相比漏电起痕指数 Compared to the leakage tracing index |
PLC Code | UL 746A | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
|||
1.49 mm 1.49 mm |
|||
2.99 mm 2.99 mm |
|||
2.48 mm 2.48 mm |
|||
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
光泽度 gloss |
|||
60° 60° |
ASTM D523 |
备注 | |||
---|---|---|---|
暂无数据 |
【新闻资讯】查看全部
5G时代:高性能优质材料争夺战
2021-09-12 搜料网资讯: 如今5G正渗透在我们生活的方方面面,从智能手机、智能汽车到移动通信,愈发成熟的新技术为生活带来无限可能。同时,5G基站、微基站、终端设备等对相关的配套设施及 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |