牌号简介 About |
---|
ADSINT PA12 ESD(静电放电)是一种含有碳纤维的PA12粉末,具有低操作限制。它具有良好的耗散性能(10^5欧姆/平方),保持了与ADSINT PA12相同的机械性能和光滑表面。ADSINT PA12 ESD已经在最常见的SLS打印机上进行了测试和批准。刷新率介于30%和40%之间,具体取决于应用程序。 AdSint® PA12 ESD (ElectroStatic Discharge) is a PA12 powder containing carbon fibre with low manipulation restrictions. It has good dissipative properties (10^5 Ohms/square) keeping the same mechanical properties and smooth surface like AdSint® PA12. AdSint® PA12 ESD has been tested and approved on most common SLS printers. The refreshrate is between 30% and 40%, depending on the application. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.950 到 1.05 | g/cm³ | ISO 61 |
表观密度 Apparent density 2 |
0.45 到 0.55 | g/cm³ | ISO 1068 |
吸水率 Water absorption rate |
|||
平衡,23℃,50% RH Equilibrium, 23 ℃, 50% RH |
0.30 到 0.50 | % | ISO 62 |
颗粒大小分布 Particle size distribution |
|||
Course Particles <22 µm Course Particles <22 µm |
< 10 | % | |
Course Particles >60 µm Course Particles >60 µm |
< 15 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
MPa | ISO 527-2/1B | |
拉伸强度 tensile strength |
MPa | ISO 527-2/1B | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2/1B | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
熔融温度 Melting temperature |
℃ | ISO 11357-3 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Mean Diameter Mean Diameter |
µm | ISO 13320 |
备注 |
---|
2. Packed |
【新闻资讯】查看全部
海南炼化成功生产聚丙烯新产品抗菌无纺布料
2021-08-03 搜料网资讯: 8月1日,海南炼化试生产的首批150吨合格抗菌无纺布料新产品PPH-Y40J顺利投放市场。 PPH-Y40J产品具有易加工、密度小、化学性质稳定、抗霉抗菌等优点,由于抗菌剂的加入, |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |