牌号简介 About |
---|
DURAPEEK LS30GF1是一种30%gf peek的专利低应力配方。它设计用于高压油气应用。它是一种特殊配方的等级,包括玻璃,在提供与450gl30类似的强度和刚度的同时保持电气绝缘性。它在各向同性行为、低内应力、耐高温和提高延伸率方面提供了改进的性能。它是棕色的。 DURAPEEK LS30GF1 is a proprietary low stress formulation of 30%GF PEEK. It is designed for use in HPHT Oil & Gas applications. It is a specially formulated grade that includes glass and remains electrically insulative while providing a similar level of strength and stiffness to 450GL30. It provides improved performance in regards to isotropic behavior, low internal stressed, high temperature resistance, and improved elongation. It is brown in color. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.51 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
380℃,10.0kg 380℃,10.0kg |
7.0 | g/10min | ASTM D1238 |
收缩率 Shrinkage rate |
|||
MD MD |
0.40 到 0.60 | % | ASTM D955 |
吸水率 Water absorption rate |
|||
25℃,24hr 25℃,24hr |
< 0.10 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
11000 | MPa | ASTM D638 |
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
断裂弯曲伸长率 Elongation at break and bending |
% | ASTM D790 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
连续使用温度 Continuous use temperature |
℃ | UL 746B | |
最高使用温度 Maximum operating temperature |
℃ | ||
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
热变形温度 Hot deformation temperature |
℃ | ASTM D648 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | ASTM D257 | |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 |
备注 | |||
---|---|---|---|
暂无数据 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |