牌号简介 About |
---|
Nymax GF 600系列玻璃纤维增强尼龙6化合物专门设计用于需要高硬度、拉伸强度和韧性的应用,同时提供比尼龙6/6化合物更好的表面外观。根据所需的刚度特性,这些材料可用于各种加固等级,并且其配方可在大多数标准热塑性加工设备中提供易加工性。 The Nymax® GF 600 Series of glass fiber-reinforced nylon 6 compounds have been specifically engineered for applications requiring high stiffness, tensile strength, and toughness, while providing enhanced surface appearance versus nylon 6/6 compounds. These materials are available in a broad range of reinforcement levels depending upon stiffness characteristics desired and have been formulated to offer ease of processing in most standard thermoplastic processing equipment. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.39 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD MD |
0.20 到 0.40 | % | ASTM D955 |
吸水率 Water absorption rate |
|||
24hr 24hr |
1.0 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
8960 | MPa | ASTM D638 |
拉伸强度 tensile strength 2 |
|||
屈服 yield |
152 | MPa | |
断裂 fracture |
MPa | ||
拉伸应变 Tensile strain 2 |
|||
屈服 yield 2 |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃,3.2mm,注塑成型 23 ℃, 3.2mm, injection molding |
J/m | ASTM D256-A | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,退火,3.18 mm 1.8 MPa, annealed, 3.18 mm |
℃ | ASTM D648 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
备注 |
---|
2. 类型 1, 5.1 mm/min |
【新闻资讯】查看全部
巴斯夫续签了与梅赛德斯-奔驰的商业供应协议
2021-03-23 搜料网资讯: 巴斯夫最近与梅赛德斯-奔驰在亚太地区签订了一份多年期合同,将其与该汽车公司长期以来经商业认可的供应商地位扩大到澳大利亚、日本、马来西亚、韩国、台湾和泰国 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |