牌号简介 About |
---|
聚芳酰胺,60%玻璃纤维增强,热稳定。适用于各种注塑件。 Polyarylamide with 60% glass fiber reinforcement and heat stabilization. For all kind of injection molding parts. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.77 | g/cm³ | |
吸水率 Water absorption rate |
|||
饱和,23℃ Saturation, 23 ℃ |
1.3 | % | |
平衡,23℃,50% RH Equilibrium, 23 ℃, 50% RH |
0.13 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
24000 | MPa | |
拉伸强度 tensile strength |
|||
断裂 fracture |
280 | MPa | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ||
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
23℃ 23℃ |
kJ/m² | ||
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
|||
23℃ 23℃ |
kJ/m² | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ||
熔融温度 Melting temperature 2 |
℃ | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
kV/mm | ||
相比漏电起痕指数 Compared to the leakage tracing index |
V | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
可燃性等级 Flammability level |
|||
1.6 mm 1.6 mm |
备注 |
---|
2. 10°C/min |
【新闻资讯】查看全部
陶氏化学德克萨斯PDH工厂开始检修
2021-05-20 搜料网资讯: 据烯烃市场人士5月19日透露,陶氏化学位于弗里波特的丙烷脱氢装置将在未来60-90天内进行维护。 据消息人士称,PDH装置最初在5月17日进行了一次计划外检修而停运,随后 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |