公司信息及水印
牌号简介 About |
---|
Eastar共聚酯MN006 Natural经过FDA/ISO 10993和USP六级生物评估测试,在γ和ETO灭菌后进行测试。它是一种非常透明的聚合物,具有优异的冲击强度、耐化学性和低收缩率。Eastar共聚酯MN006天然含有脱模剂。本产品已通过绿色卫士室内空气质量认证。Greenguard室内空气质量认证标志是通过Greenguard环境研究所(GEI)许可使用的注册认证标志。GEI是一个行业独立的非盈利组织,负责监督Greenguard认证计划。Greenguard认证计划是一个行业独立的第三方测试计划,用于室内环境的低排放产品和材料。欲了解更多关于GEI的信息,并获得Eastman共聚酯的可打印证书,请访问www.greenguard.org。在制造商类别下选择Eastman Chemical Company,然后单击搜索以显示我们的产品列表。 Eastar™ Copolyester MN006 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ Copolyester MN006 Natural is a brilliantly clear polymer having excellent impact strength, chemical resistance, and low shrinkage rates. Eastar™ Copolyester MN006 Natural contains a mold release. This polymer is the toughest of the Eastar™ family of products. Additional outstanding features are chemical resistance and excellent color and property retention following gamma and e-beam sterilization. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.23 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD MD |
0.20 to 0.50 | % | ASTM D955 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ASTM D256 | ||
-40℃ -40℃ |
77 | J/m | ASTM D256 |
23℃ 23℃ |
No Break | ASTM D256 | |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ASTM D4218 | ||
-40℃ -40℃ |
No Break | ASTM D4218 | |
23℃ 23℃ |
ASTM D4218 | ||
装有测量仪表的落镖冲击 Dart impact equipped with measuring instruments |
ASTM D3763 | ||
-40℃,Energy @ Max. Load -40℃,Energy @ Max. Load |
J | ASTM D3763 | |
23℃,Energy @ Max. Load 23℃,Energy @ Max. Load |
J | ASTM D3763 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
透光率 Transmittance |
ASTM D1003 | ||
总计 total |
% | ASTM D1003 | |
Regular Regular |
% | ASTM D1003 | |
雾度 Haze |
% | ASTM D1003 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
|||
23℃ 23℃ |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
|||
断裂,23℃ Fracture, 23 ℃ |
MPa | ASTM D638 | |
屈服,23℃ Yield, 23 ℃ |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
屈服,23℃ Yield, 23 ℃ |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
弯曲强度 bending strength |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
十建潍坊聚丙烯项目进入开车投料阶段
2022-01-20 搜料网资讯: 1月18日,炼化工程十建公司承建的山东潍坊30万吨/年高端聚丙烯项目实现主体完工目标,标志着该项目由项目建设进入开车投料准备阶段。 据了解,山东潍坊30万吨/年高端 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |