牌号简介 About |
---|
PPC20-2NA是一种中抗冲聚丙烯共聚物,用于注塑成型,需要平衡中等抗冲性、刚度和高流动性。PPC20-2NA含有抗静电成核剂。Osterlene® PPC20-2NA符合食品药品监督管理局21 CFR第177.1520节的要求。本法规允许在“…与食品接触的物品或成分中使用该烯烃聚合物。”具体限制可能适用。有关更多信息,请联系您的Osterman销售代表。 PPC20-2NA is a medium impact polypropylene copolymer formulated for injection molding applications requiring a balance of medium impact resistance, stiffness and high-flow. PPC20-2NA contains an anti-static and nucleating agent. Osterlene PPC20-2NA meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
20 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
110 | J/m | ASTM D256 |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
42.0 | kJ/m² | ASTM D4812 |
落锤冲击 Drop hammer impact |
|||
-18℃ -18℃ |
20.3 | J | ASTM D5420 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
104 | ℃ | ASTM D648 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
屈服 yield |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
1% 正割 1% secant |
MPa | ASTM D790-B |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
众泰汽车欠款数亿元,此前否认破产传言,车企淘汰赛正在加速
2019-10-14 2019年10月9日,网传某股份制银行关于四家车企年底进入破产程序的内部邮件曝光,此事引起人们的广泛关注。网传四家企业分别为众泰汽车、华泰汽车、力帆汽车及猎豹汽车,虽四家企 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |