牌号简介 About |
---|
AKROTEK® PK-VM GF 50 natural (4905)是一种50%的玻璃纤维增强聚酮,具有很高的刚度和强度,且固有颜色较浅。应用主要是机械工程和汽车工业中的部件。 AKROTEK® PK-VM GF 50 natural (4905) is a 50% glass fibre reinforced Polyketon with very high stiffness and strength and light inherent color. Components in mechanical engineering and the automotive industry. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.65 | g/cm³ | ISO 1183 |
螺旋流动长度 Spiral flow length 2 , 3 |
48.0 | cm | Internal Method |
收缩率 Shrinkage rate |
ISO 294-4 | ||
TD TD |
0.60 | % | ISO 294-4 |
MD MD |
0.30 | % | ISO 294-4 |
吸水率 Water absorption rate |
|||
70℃,62% RH 70℃,62% RH |
0.40 to 0.50 | % | ISO 1110 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
MPa | ISO 527-1-2 | |
拉伸强度 tensile strength |
|||
断裂 fracture |
MPa | ISO 527-2/5 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2/5 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
23℃ 23℃ |
kJ/m² | ISO 179/1eA | |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
|||
23℃ 23℃ |
kJ/m² | ISO 179/1eU | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
熔融温度 Melting temperature 5 |
℃ | DIN EN 11357-1 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | IEC 60093 | |
体积电阻率 Volume resistivity |
ohms·cm | IEC 60093 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
1.60 mm 1.60 mm |
UL 94 | ||
灼热丝可燃性指数 Glowing wire flammability index |
|||
2.0 mm 2.0 mm |
℃ | IEC 60695-2-12 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
灰份含量 Ash Content |
% | ISO 1172 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 模具温度: 176°F, 熔体温度: 482°F, 注塑压力: 1.09E+4 psi |
3 cross section of flow spiral: 7 mm x 3.5 mm |
4 10°C/min |
【新闻资讯】查看全部
模具冲裁间隙解析
2016-07-11 什么是模具冲裁间隙?模具冲裁间隙指的是凸、凹模刃口间的缝隙。 其模具冲裁间隙作用:是冲压工艺和模具设计中的重要参数,它直接影响冲裁件的质量、模具寿命和力能的消耗。当设计冲模时,应根据实际情况和需要合理地选用冲裁间隙。 模具冲裁间隙分类:根据冲裁件尺寸精度、剪切面质量、模具寿命和力能消耗等主要因素,将金属材料冲裁间隙分成三种类型,即[型(小间隙)、H型(中等间隙)、皿型(大间隙)。 模具冲裁间隙的选用:冲裁间隙的大小与被冲材料的性质及厚度有关, |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |