物性表自定义
公司信息及水印
公司信息及水印
下载中文物性表
下载英文物性表
邮件发送/他人
| 牌号简介 About |
|---|
| Bormed™ HG820MO是一种用于医疗应用评估的树脂。Bormed™ HG820MO是一种具有内部润滑剂的澄清均聚物，通常用于注塑成型。从Bormed™ HG820MO生产的产品的特点是易于脱模，控制低摩擦和低翘曲。Bormed™ HG820MO可以用环氧乙烷或蒸汽灭菌。 Bormed HG820MO is a resin intended for evaluation for use in Healthcare applications. Bormed HG820MO is a clarified homopolymer and typically used in injection moulding. Additivation has been optimized to provide good demoulding properties. This polymer is a CR (controlled rheology) grade with narrow molecular weight distribution giving low risk of warpage. Bormed HG820MO can be sterilised with ethylene oxide or steam. Applications Bormed HG820MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed HG820MO . Disposable non pre-filled syringes Laboratory disposable This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure. Special Features Easy processing Good transparency |
产品描述 Product Description
用途：医疗/护理用品;药物;包装;
加工条件：注射成型 Injection Molding
性能特点： 可回收; 均聚物; 低翘曲性; 低摩擦系数; 易加工; Low warping,Excellent Processability,Renewable resources,Low coefficient of friction,Homopolymer
| 技术参数 Technical Data | |||
|---|---|---|---|
|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
密度 Density |
0.905 | g/cm³ | ISO 1183 |
|
熔体质量流动速率 Melt Flow Rate |
|||
|
230℃，2.16kg 230℃，2.16kg |
28 | g/10min | ISO 1133 |
|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
拉伸模量 Tensile modulus |
|||
|
50 mm 50 mm |
1900 | MPa | ISO 527-2 |
|
拉伸强度 tensile strength |
|||
|
屈服 yield |
40.0 | MPa | ISO 527-2/50 |
|
拉伸应变 Tensile strain |
|||
|
屈服 yield |
7.0 | % | ISO 527-2/50 |
|
弯曲模量 Bending modulus 2 |
MPa | ISO 178 | |
|
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
|
23℃ 23℃ |
kJ/m² | ISO 179/1eA | |
|
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
热变形温度 Hot deformation temperature |
|||
|
0.45 MPa，未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/Bf | |
| 备注 |
|---|
| 1 一般属性：这些不能被视为规格。 |
| 2 2.0 in/min |
|
【新闻资讯】查看全部 
台州塑交会 | 拓斯达注塑机强势吸睛，星耀会再起航签约不断
2021-10-19 搜料网资讯： 10月15日-18日，第20届中国塑料交易会（简称塑交会）在浙江台州市国际会展中心举办。拓斯达携注塑机、CNC、工业机器人三大产品同时亮相，展现出国产智能装备之魅力； |
|
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。 |
当前牌号已加入对比
支付宝
微信支付