牌号简介 About |
---|
Quadrant EPP Semitron® MP-370是一种聚醚醚酮(PEEK)产品,。 它,在北美洲或拉丁美洲有供货。 主要特性为:阻燃/额定火焰。 Quadrant EPP Semitron® MP-370 is a Polyetheretherketone (PEEK) product. It is available in Latin America or North America. Primary characteristic: flame rated. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.62 | g/cm³ | ASTM D792 |
吸水率 Water absorption rate |
|||
24hr 24hr |
1.1E-3 | % | |
饱和 saturated |
5.0E-3 | % | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
21 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
149 | ℃ | ASTM D648 |
熔融温度 Melting temperature |
℃ | ||
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD:-40~149℃ MD:-40~149℃ |
1/℃ | ASTM E831 | |
导热系数 Thermal conductivity coefficient |
W/m/K | ASTM F433 | |
最高使用温度 Maximum operating temperature |
|||
Air,Continuous Air,Continuous |
℃ | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | ESD S11.11 | |
体积电阻率 Volume resistivity |
ohms·cm | ESD S11.11 | |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
|||
1 MHz 1 MHz |
ASTM D150 | ||
耗散因数 Dissipation factor |
|||
1 MHz 1 MHz |
ASTM D150 | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
|||
3.20 mm 3.20 mm |
UL 94 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
限压速度 Pressure limiting speed |
|||
4:1 safety factor 4:1 safety factor |
MPa·m/s | 内部方法 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
M 级 M-level |
ASTM D785 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
|||
-- -- |
MPa | ||
65℃ 65℃ |
MPa | ||
150℃ 150℃ |
MPa | ||
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
压缩模量 Compression modulus |
MPa | ASTM D695 | |
压缩强度 compressive strength |
|||
10% 应变 10% strain |
MPa | ASTM D695 | |
剪切强度 shear strength |
MPa | ASTM D732 | |
磨损因数 Wear factor |
10^-8 mm³/N·m | 内部方法 |
备注 | |||
---|---|---|---|
暂无数据 |
【新闻资讯】查看全部
雷普索尔收购废物再生公司的战略股份
2022-04-07 总部位于加拿大的Enerkem是一家利用废料生产低碳强度生物燃料和循环化学品的生产商。近日,Enerkem宣布新一轮融资已经结束,共筹集1.87亿欧元。 除了包括战略投资者Suncor Energy和Aven |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |