牌号简介 About |
---|
Ebarta lh 22是一种环氧树脂层压树脂,根据其用途,可与慢速GL硬化剂或快速GR硬化剂一起使用。它们以最小的生理作用来区分。在尺寸精度和稳定性方面,由Ebarta lh 22制成的层压板甚至达到了很高的要求。由于其长寿命,Ebarta lh 22/gl特别适用于大面积和厚层压板,厚度也超过10 mm,一步到位,室温下固化,无任何收缩。应用层压板模具控制仪表主模型夹具性能尺寸精确长寿命低放热特性 ebalta LH 22 is an epoxy laminating resin, which, depending on its application, can be used with the slow GL hardener or the faster GR hardener. They distinguish by minimal physiolgical effects. Regarding dimensional accuracy and -stability, laminates made of ebalta LH 22, even come up to great demands. Due to its long potlife ebalta LH 22/GL is especially suitable for large-area and thick laminates, which also with a thickness of more than 10 mm, applied in one step, cure without any shrinkage at room temperature. Applications Laminate molds Control gauges Master models Fixtures Properties dimensionally accurate long potlife low exothermic character |
技术参数 Technical Data | |||
---|---|---|---|
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
15 到 22 | kJ/m² | ISO 179 |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
20℃ 20℃ |
1.32 到 1.38 | g/cm³ | |
粘度 viscosity |
|||
25℃ 25℃ |
1.1 到 1.5 | Pa·s | |
固化时间 Curing time |
|||
20℃ 20℃ |
16 到 24 | hr | |
储存稳定性 storage stability 1 |
|||
20 ℃ 20 ℃ 1 |
40 到 45 | min | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ISO 7619 | ||
弯曲模量 Bending modulus |
MPa | ISO 178 | |
弯曲强度 bending strength |
MPa | ISO 178 | |
压缩强度 compressive strength |
MPa | ISO 604 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
热固组件 Thermosetting components |
|||
树脂 resin |
|||
硬化法 Hardening method |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 200 g |
【新闻资讯】查看全部
总投资515亿元滨化环氧丙烷项目开建
2021-03-03 搜料网资讯: 国内首套自主研发共氧化法环氧丙烷项目通过鉴定,总投资515亿元滨化项目开建! 2021年2月27日, SELOx工艺制备环氧丙烷/叔丁醇成套技术及其工业化通过中国石油和化学工 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |