牌号简介 About |
---|
Unichem 9066G-015是一种透明、无毒、半刚性的乙烯基化合物,专门为医疗和食品工业部件的注塑成型而配制。这种化合物是以柠檬酸增塑剂为基础的。这种化合物设计用于在γ射线灭菌时抵抗变色和降解。美国食品药品监督管理局根据《联邦法规》第21条对制造Unichem 9066G-015用于食品应用的所有成分进行了制裁。为满足医疗行业的严格要求,保持所有部件和成品的完整可追溯性和批次标识。 Unichem 9066G-015 is a clear, non-toxic, semi-rigid, vinyl compound formulated specifically for the injection molding of components for the medical and food industries. This compound is based on a Citrate plasticizer. This compound is designed to resist discoloration and degradation when subjected to gamma ray sterilization. The U.S. Food and Drug Administration sanction all components used in the manufacture of Unichem 9066G-015 for food applications under Title 21 of the Code of Federal Regulations. To comply with the exacting needs of the medical industry, complete traceability and lot identification of all components and finished products are maintained. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.29 | g/cm³ | ASTM D792 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脆化温度 Embrittlement temperature |
-15.0 | ℃ | ASTM D746 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
90 | ASTM D2240 | |
拉伸模量 Tensile modulus |
|||
100% 正割 100% secant |
15.2 | MPa | ASTM D638 |
拉伸强度 tensile strength |
|||
屈服 yield |
22.1 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
屈服 yield |
% | ASTM D638 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
探究3D打印技术更广泛的使用
2018-08-06 人们正在探索3D打印技术更广泛的应用,包括制造、医疗设备、时尚甚至食品。但是,3D打印最有效的形式之一却有一个很大的缺点:它只能打印灰色或黑色的物体。现在,研究人员对这种方法进行了调整,使其能够打印出彩虹的所有颜色。他们在ACS期刊Nano Letters上发表了他们的研究结果。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |