牌号简介 About |
---|
Protherm4529是一种用于大型室内配件的刚性注塑CPVC。典型应用是在饮用水和化学品输送系统中,特别是在存在高阻力和/或高温的地方。Protherm4529在NSF标准14和61下列出,满足或超过ASTM D-1784电池等级要求。 ProTherm®4529 is a rigid injection molding CPVC for large interior fittings. Typical applications are in potable water and chemical transfer systems especially where high resistance and/or elevated temperatures exist. ProTherm®4529 is listed under NSF Standard 14 and Standard 61 and meets or exceeds ASTM D-1784 cell class requirements. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.47 到 1.51 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD MD |
0.50 到 0.70 | % | ASTM D955 |
PVC单元分类 PVC unit classification |
23447 | ASTM D1784 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
3030 | MPa | ASTM D638 |
拉伸强度 tensile strength |
55.2 | MPa | ASTM D638 |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
3.2mm 3.2mm |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 3 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 载荷2 (50N) |
【新闻资讯】查看全部
联合石化在广东碳市场完成自营交易
2022-06-27 近日,联合石化在广东完成了5万吨碳配额的自营交易,这也是该公司在广东碳市场的首次自营交易,并取得了良好的效益。 联合石化作为集团碳交易业务的主要运营商,充分发挥其专 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |