牌号简介 About |
---|
BDF331P是一种低到中粘度固化型含氟弹性体共聚物。该等级非常适合需要良好抗撕裂性和良好工艺性能的应用。BDF331P可以复合以满足主要的氟橡胶规格。BDF331P可用于复杂几何形状的压缩成型或注射成型。它可以使用典型的氟弹性体配合剂进行混合。混合可以通过两个辊磨机或内部搅拌机完成。制成品可采用多种橡胶加工方法生产。 BDF331P is a low to medium viscosity curative incorporated fluoroelastomer copolymer. This grade is well suited for application where good tear resistance and excellent process properties are required. BDF331P can be compounded to meet the major fluoroelastomer specifications. BDF331P can be used for compression molding or injection molding of complex geometries. It can be mixed using typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Finished goods can be produced by a variety of rubber processing methods. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.80 | g/cm³ | |
门尼粘度 Mooney viscosity |
|||
ML 1+10,121℃ ML 1+10,121℃ |
30 | MU | |
氟含量 Fluorine content |
66 | % | |
可溶性 solubility |
LMW Ketones and esters | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness 2 |
|||
邵氏 A Shaw's A 2 |
76 | ASTM D2240 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
屈服 yield 2 |
MPa | ASTM D412 | |
拉伸应变 Tensile strain 2 |
|||
断裂 fracture 2 |
% | ASTM D412 | |
压缩形变 Compression deformation |
|||
200℃,70 hr 200℃,70 hr |
% | ASTM D395B | |
MH(177℃) MH(177℃) 3 |
N·m | ||
ML(177℃) ML(177℃) 3 |
N·m | ||
t'90(177℃) t'90(177℃) 3 |
min | ||
ts2(177℃) ts2(177℃) 3 |
min |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Press Time: 10 min, Press Temperature: 170°C, Post Cure Time: 24 hr, Post Cure Temperature: 230°C |
3 MDR2000 Rheometer, 100cpm, 0.5° Arc, 6 minutes |
【新闻资讯】查看全部
暴涨又暴跌!这种原材料价格现巨幅波动!成交量骤减近60%
2021-06-09 搜料网资讯: 铁矿石价格从去年开始一飞冲天,现货价格最高时的涨幅更是达到 2.5 倍。 5 月中旬以来,铁矿石价格出现剧烈波动,一度下跌近 20%,随后再次反弹。目前铁矿石进口情况 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |