公司信息及水印
牌号简介 About |
---|
TPX® MBZ230(A)是一种聚甲基戊烯共聚物(PMP 共聚物)材料,。 该产品在北美洲有供货,加工方式为:挤出或注射成型。 TPX™ MBZ230(A) TPX™ MBZ230(A) is a Polymethylpentene Copolymer (PMP Copolymer) material. It is available in North America for extrusion or injection molding. TPX™ MBZ230(A) TPX™ is a 4-methylpentene-1-based olefin copolymer. TPX™ has a unique molecular structure. Although TPX™ is a crystalline olefin polymer, it shows transparency. Because of its excellent heat-resistance, release property and chemical resistance, TPX™ is used for industrial materials, including mandrels and sheaths in the manufacture of high-pressure rubber hose, mold cups to create LED light and other applications such as release film on FPC manufacturing process and release paper in the manufacture of synthetic leather. Furthermore, TPX™ possesses a lowest density among thermoplastic polymers and then provides the molded articles with lower weight. This leads to reduce the environmental load for transportation. It is also noted that TPX™ is a halogen-free polymer denoted as environmentally-friendly material. TPX™ is also used for food-related applications such as food wraps, food preservation packs, baking carton and microwave oven tableware. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.10 | g/cm³ | 内部方法 |
熔体质量流动速率 Melt Flow Rate |
|||
260℃,5.0kg 260℃,5.0kg |
57 | g/10min | 内部方法 |
螺旋流动长度 Spiral flow length 3 |
48.0 | cm | 内部方法 |
收缩率 Shrinkage rate 4 |
内部方法 | ||
MD:2.0 mm MD:2.0 mm |
1.5 | % | 内部方法 |
TD:2.0 mm TD:2.0 mm |
1.1 | % | 内部方法 |
吸水率 Water absorption rate |
|||
饱和 saturated |
% | ASTM D570 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
注塑 Injection molding |
J/m | ASTM D256 | |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam 7 |
|||
23℃,注塑成型 23 ℃, injection molding 7 |
J/m | ASTM D4812 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature 8 |
|||
0.45 MPa,未退火,6.35 mm 0.45 MPa, unannealed, 6.35 mm 8 |
℃ | ASTM D648 | |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 9 | |
结晶峰温度 Crystallization peak temperature |
|||
DSC DSC |
℃ | ASTM D3418 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD:-10~160℃ MD:-10~160℃ |
1/℃ | 内部方法 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity 10 |
|||
2 mm 2 mm 10 |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength 10 |
|||
2 mm 2 mm 10 |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant 10 |
|||
2.00 mm,1 MHz 2.00 mm,1 MHz 10 |
ASTM D150 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸模量 Tensile modulus 5 |
|||
23℃,注塑成型 23 ℃, injection molding 5 |
MPa | ASTM D638 | |
拉伸强度 tensile strength 5 |
ASTM D638 | ||
屈服,23℃,注塑成型 Yield, 23 ℃, injection molding |
MPa | ASTM D638 | |
断裂,23℃,注塑成型 Fracture, 23 ℃, injection molding |
MPa | ASTM D638 | |
拉伸应变 Tensile strain 5 |
|||
断裂,23℃,注塑成型 Fracture, 23 ℃, injection molding 5 |
% | ASTM D638 | |
弯曲模量 Bending modulus 6 |
|||
3.20 mm,注塑成型,51 mm跨距 3.20 mm, injection molded, 51 mm span 6 |
MPa | ASTM D790 | |
弯曲强度 bending strength 6 |
|||
3.20 mm,注塑成型,51 mm跨度 3.20 mm, injection molded, 51 mm span 6 |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 模具温度: 163°F, 熔体温度: 590°F |
3 260 to 280°C |
4 类型 4, 2.0 in/min |
5 0.051 in/min |
6 Partial Break |
7 120°C/hr |
8 速率 A (50°C/h), 压 力1 (10N) |
9 Injection Molded |
【新闻资讯】查看全部
微塑料颗粒成“达摩克利斯之剑” 生物基可降解塑料或成出路
2022-04-11 中新网宁波4月10日电 (记者 方堃)北极塑料雪、美国塑料雨、全球人均每周摄入约2000颗塑料微粒、婴儿的粪便中含有大量的微塑料、人类胎盘中发现了塑料微颗粒近年来,科学界关于微 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |